FASCO
FASCO A195 Round OEM Blower 3400 RPM 1 Phase Direct Plastic 1 Speed Transparent
Round OEM blower for furnace replacement, 3400 RPM motor speed, 115 V single-phase, 1.75 A draw, 60 Hz, shaded-pole motor, Class B insulation, 180 °F max inlet temperature
- ColorTransparent
- 115 V AC single-phase operation for standard furnace wiring
- 3,400 RPM motor speed delivers strong airflow performance
- Direct-drive design eliminates belt maintenance
- Maximum 180 °F inlet temperature suits high-heat applications
- Replaces Trane 7021-11543 and X38040313070 part numbers
HVAC blower for furnace replacement
The FASCO A195 is a single-speed shaded-pole blower rated at 3400 RPM on 115 V AC, 1-phase, 60 Hz power. It draws 1.75 A and accepts inlet air up to 180 °F while delivering a maximum static pressure of 2 7/8 in wc. The unit is built for direct-drive furnace applications.
Transparent plastic housing with wire leads
The transparent plastic body allows visual inspection of the impeller without disassembly. Electrical connection is made through wire leads rather than a plug, so the installer must splice or terminate them to match the furnace control board. No capacitor, bracket or mounting hardware is included in the package.
Verify voltage, phase
Confirm the existing furnace runs on 115 V AC single-phase 60 Hz supply and that the nameplate current budget accommodates 1.75 A. Cross-reference the OEM part numbers 7021-11543, 7021-11543S or X38040313070 with the Trane equipment label. The blower is restricted from sale in certain states; check local codes for compliance.
Highlights
- 115 V AC single-phase operation for standard furnace wiring
- 3,400 RPM motor speed delivers strong airflow performance
- Direct-drive design eliminates belt maintenance
- Maximum 180 °F inlet temperature suits high-heat applications
- Replaces Trane 7021-11543 and X38040313070 part numbers
Specifications
| Brand | FASCO |
|---|---|
| Color | Transparent |
Questions about this item
Will the shaded-pole motor brushes need periodic replacement on this FASCO A195 blower?
The motor uses a shaded-pole design without brushes, so there are no brushes to wear out or replace during the unit's service life.
What static-pressure limit will the blower hit first when running continuously against a restricted duct?
The nameplate lists a maximum static pressure of 2 7/8 in wc; once system resistance reaches that point airflow drops to zero.
How hot does the housing get when the blower runs all day at 3400 RPM?
The motor insulation is Class B rated for 180 °F inlet air temperature, so the housing can become very warm but stays within design limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
