We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FASCO A150 induced draft furnace blower motor in aluminium and steel housing

FASCO

FASCO A150 Induced Draft Furnace Blower 208/230V 0.5A 3400 RPM

SKU CH-NQP4-81SKJ

Induced draft furnace blower for natural-gas furnaces, 208/230 V AC single-phase, 0.5 A, 3400 RPM shaded-pole motor with wire leads, replaces Trane models 7021-7833, 7021-8928, C661452P01.

  • Direct replacement for Trane models 7021-7833, 7021-8928, C661452P01, X38080029010
  • Operates on 208-230V AC single-phase power at 60 Hz frequency
  • Shaded pole motor with Class B insulation for reliable furnace operation
  • Draws 0.5 A current at maximum 3400 RPM fan speed
  • Wire lead electrical connection simplifies installation in gas furnaces

Product Identity

The FASCO A150 is an induced draft furnace blower designed for natural gas furnaces. It operates on 208-230V AC single-phase power at 60 Hz with a 0.5 A current draw and a maximum speed of 3,400 RPM. The motor uses a shaded pole design with Class B insulation and connects via wire leads. It replaces Trane manufacturer model numbers 7021-7833, 7021-8928, C661452P01 and X38080029010.

Suitability

This blower suits HVAC technicians or facility managers replacing a failed inducer assembly on a compatible Trane gas furnace where the nameplate specifies 208-230V AC, 0.5 A and 3,400 RPM. It is not for installers working on equipment that requires a different voltage, a higher amperage rating, a different motor type such as PSC or ECM, or a blower with an outlet diameter specification not listed here.

Decisive Specification

The nameplate voltage of 208-230V AC at 0.5 A and the maximum fan speed of 3,400 RPM are the critical figures that must match the original motor data plate exactly; if the furnace label shows different electrical values or a different RPM, this unit will not function as a direct replacement.

Highlights

  • Direct replacement for Trane models 7021-7833, 7021-8928, C661452P01, X38080029010
  • Operates on 208-230V AC single-phase power at 60 Hz frequency
  • Shaded pole motor with Class B insulation for reliable furnace operation
  • Draws 0.5 A current at maximum 3400 RPM fan speed
  • Wire lead electrical connection simplifies installation in gas furnaces

Specifications

BrandFASCO

Questions about this item

How often should the shaded-pole motor bearings be lubricated or the motor replaced on this FASCO A150 blower?

The shaded-pole motor uses sealed bearings that do not require periodic lubrication; plan to replace the entire blower assembly if motor noise or vibration increases after extended service.

What limits continuous operation first — motor temperature or airflow restriction — when running at 3,400 RPM on 208-230 V?

Class B insulation sets the winding temperature ceiling, so sustained 3,400 RPM operation will hit the thermal limit before airflow becomes the bottleneck.

How much audible noise and heat does the unit produce when running all day on a 60 Hz supply?

At 0.5 A draw the motor generates modest heat, and the shaded-pole design runs quietly enough for typical furnace installations during continuous daily cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.