We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FASCO A088 induced draft furnace blower motor, plastic housing, wire leads visible

FASCO

FASCO A088 Induced Draft Furnace Blower 115V 1.3A 3200/3400 RPM

SKU CH-VGR8-VMAEA

Induced draft furnace blower for natural-gas furnaces, 115 V AC, 1.3 A, 50/60 Hz, shaded-pole motor with 3200/3400 RPM nameplate speeds, compatible with Evcon and York models 2940-391 and 70215478

  • Direct replacement for Evcon and York furnaces
  • 115V AC shaded-pole motor runs at 1.3 A
  • Dual-speed operation at 3200 and 3400 RPM
  • 3 in inlet and 2 1/2 in outlet fit existing ductwork
  • Insulation Class B protects motor windings from heat

FASCO A088 115 V Induced Draft Blower

This FASCO A088 is a single-phase shaded-pole blower rated for 115 V AC at 1.3 A and 50/60 Hz. It serves as a direct replacement for induced-draft assemblies on natural-gas furnaces. The motor carries Class B insulation and connects via wire leads.

Suits Evcon and York gas furnaces needing 2940-391

Technicians servicing Evcon or York gas furnaces that specify manufacturer numbers 2940-391 or 70215478 will find the correct inlet and outlet dimensions here. Installations requiring a different voltage, phase count, or motor type should select another part.

3 200 RPM maximum motor speed sets the draft

The nameplate lists a maximum motor speed of 3 200 RPM and a maximum fan speed of 3 400 RPM, which determines the induced-draft airflow the furnace can achieve. Verify that this speed range matches the appliance specification before ordering.

Highlights

  • Direct replacement for Evcon and York furnaces
  • 115V AC shaded-pole motor runs at 1.3 A
  • Dual-speed operation at 3200 and 3400 RPM
  • 3 in inlet and 2 1/2 in outlet fit existing ductwork
  • Insulation Class B protects motor windings from heat

Specifications

BrandFASCO

Questions about this item

How do I verify the A088 blower is running at the correct speed after installation?

Measure motor RPM with a tachometer; the nameplate lists maximum motor speed of 3,200 RPM and maximum fan speed of 3,400 RPM at 115V AC, 50/60 Hz.

What components are included with the FASCO A088 and what must I supply?

The blower assembly ships with wire leads for electrical connection; you must provide mounting hardware, 3-inch inlet and 2-1/2-inch outlet duct adapters, and a 115V AC power source.

Which replacement model numbers does the A088 cover so I know I am ordering the right part?

This blower replaces manufacturer model numbers 2940-391 and 70215478 for Evcon and York gas furnaces using natural gas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.