Fanvil
Fanvil WF20 USB WiFi Dongle 2.4 GHz 150 Mbps 2 in 1 accessory
A compact USB Wi-Fi dongle adds 2.4 GHz wireless connectivity at 150 Mbps to compatible Fanvil IP phones with plug-and-play simplicity
- Connects select Fanvil IP phones to wireless networks
- Plug-and-play USB dongle installs without drivers
- 4 GHz band delivers up to 150 Mbps throughput
- Low-power design reduces energy draw during operation
- Requires firmware V1.10.10 or C1.0.10 on supported models
Fanvil WF20 USB WiFi Dongle for IP Phones
The Fanvil WF20 is a compact USB wireless adapter built to connect compatible Fanvil IP phones to 2.4 GHz office networks. It delivers a maximum link rate of 150 Mbps and is designed for low-power operation in small to medium business environments.
Plug-and-Play Installation
The dongle installs without driver setup on supported handsets. Before use, X5S, X6, X210 and X210i phones must run firmware V1.10.10 or higher, while X7 and X7C models require C1.0.10 or higher; older firmware will prevent the adapter from functioning.
Check Phone Model and Wireless Band Before Ordering
Verify that your handset appears in the supported list and that your workplace Wi-Fi operates on the 2.4 GHz band, as the WF20 does not support 5 GHz networks. Buyers needing dual-band connectivity or compatibility with non-Fanvil devices should look elsewhere.
Highlights
- Connects select Fanvil IP phones to wireless networks
- Plug-and-play USB dongle installs without drivers
- 4 GHz band delivers up to 150 Mbps throughput
- Low-power design reduces energy draw during operation
- Requires firmware V1.10.10 or C1.0.10 on supported models
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the WF20 dongle is working correctly after plugging it into my Fanvil phone?
The dongle will establish a 2.4 GHz wireless link at up to 150 Mbps once the phone runs firmware V1.10.10 or higher for X5S, X6, X210, X210i, or C1.0.10 or higher for X7 and X7C.
What comes in the box with the Fanvil WF20 and is any extra cable or adapter required?
The package contains the WF20 USB Wi-Fi dongle itself; no separate cable or adapter is needed because it plugs directly into the phone's USB port.
Which Fanvil phone models and firmware versions are compatible with the WF20 dongle?
Supported models are X5S, X6, X7, X7C, X210 and X210i; X5S, X6, X210 and X210i require firmware V1.10.10 or higher, while X7 and X7C need C1.0.10 or higher.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
