Fans
Fans W4D500-GM03-01/F01Motor industrial cooling fan
Axial fan with 500 mm blades, 400/460 V operation and IP54 protection for computer-room air-conditioning
- 500 mm axial fan moves high airflow for computer-room cooling
- Dual-voltage 400/460 V design suits 50-60 Hz supplies worldwide
- 550/1060 W motor delivers strong cooling at 1180/1640 r/min
- IP54 rating protects against dust and water splashes in harsh environments
- Ball-bearing construction ensures long service life at full speed
500 mm 400 V industrial axial fan
The Fans W4D500-GM03-01/F01Motor is a new 500 mm axial fan built for computer-room air-conditioning and similar HVAC duties. It runs on three-phase 400/460 V supply at 50-60 Hz and delivers two speed steps of 1180 and 1640 r/min with matching motor powers of 550 and 1060 W. Ball bearings and IP54 protection suit continuous industrial operation. Five blades move air straight through the axis for direct-path cooling.
Ball bearings and IP54 rating
Ball bearings give long service life at full speed without interruption, which is critical for units that run around the clock. The IP54 enclosure blocks dust ingress and water splashes, so the fan survives the humid, particle-heavy air often found in plant rooms. No extra controller, filter or mounting bracket is mentioned in the data, so installers must source those separately if the site requires them.
Bolt-on axial mounting with 400 V wiring
The fan fits standard axial cut-outs and bolts directly to duct flanges or panel openings. Wiring is three-phase 400/460 V at 0.9/1.7 A, so a qualified electrician must terminate the supply and provide motor protection. The two-speed design needs a suitable starter or VFD to switch between 1180 and 1640 r/min safely. No single-phase or low-voltage option exists, so sites without 400 V three-phase power cannot use this unit.
Highlights
- 500 mm axial fan moves high airflow for computer-room cooling
- Dual-voltage 400/460 V design suits 50-60 Hz supplies worldwide
- 550/1060 W motor delivers strong cooling at 1180/1640 r/min
- IP54 rating protects against dust and water splashes in harsh environments
- Ball-bearing construction ensures long service life at full speed
Specifications
No published specifications for this item yet.
Questions about this item
How often will the ball bearings in this 500 mm axial fan need replacement?
Ball bearings in this fan are chosen for long service life and can run at full speed for many years without interruption.
What limits continuous operation of the 550 W motor at 400 V?
The motor is rated for 550 W at 400 V with 0.9 A current draw, and its IP54 protection guards against dust and water ingress during sustained use.
How much heat and noise does the 1180 r/min fan produce when running all day?
At 1180 r/min the 500 mm, five-blade impeller moves air efficiently while the ball-bearing design keeps mechanical noise low for continuous duty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
