We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal axial fan with circular frame and visible blades, terminal block on side

Fans

Fans W2E250-CL06-01 AC230V 115W/150W 2600rpm axial case fan

SKU CH-NPZY-G2YYM

AC 230 V axial case fan running at 2600 rpm with 115 W or 150 W power draw and motor stall protection

  • AC 230 V operation fits standard mains power
  • 2 600 rpm at 60 Hz delivers strong airflow
  • 150 W peak power handles demanding cooling loads
  • Die-cast aluminium housing resists heat and vibration
  • Motor stall protection prevents damage during blockage

High-Performance AC Axial Fan

The ebm-papst W2E250-CL06-01 is an AC axial fan designed for forced electronic cooling in industrial and server environments. It operates on a 230 VAC single-phase supply at both 50 Hz and 60 Hz, making it suitable for global power standards. The unit features a die-cast aluminium housing with motor stall protection for reliable continuous operation. It is built for installers who need robust airflow without complex speed control wiring.

Thermals, Noise and Power Draw

At 50 Hz the fan draws 115 W and 0.51 A while spinning at 2450 rpm, moving air against a maximum back pressure of 120 Pa. At 60 Hz consumption rises to 150 W and 0.66 A at 2600 rpm with 85 Pa maximum back pressure. Starting current peaks at 0.88 A and 0.87 A respectively, requiring a 3 µF 400 VDB capacitor for each frequency. Ambient operating range spans -25 °C to 65 °C at 50 Hz and -25 °C to 50 °C at 60 Hz, ensuring stability in harsh conditions.

Build Integration and Connectivity

The compact external rotor motor design saves internal chassis space while the sturdy steel plate construction withstands vibration. Terminal block power connection simplifies wiring without proprietary connectors. The fan delivers airflow up to 35000 m³/h and supports 100 % speed control via analog or serial interface for precise thermal management. CE approval confirms compliance for European installations. It is not suited for low-voltage DC builds or applications requiring PWM control.

Highlights

  • AC 230 V operation fits standard mains power
  • 2 600 rpm at 60 Hz delivers strong airflow
  • 150 W peak power handles demanding cooling loads
  • Die-cast aluminium housing resists heat and vibration
  • Motor stall protection prevents damage during blockage

Specifications

No published specifications for this item yet.

Questions about this item

How is the W2E250-CL06-01 mounted and what terminal step is often missed?

The die-cast aluminum housing uses corner mounting holes; the step people miss is wiring both 230 V AC lines to the terminal block and fitting the 3 µF 400 VDB run capacitor before power-on.

What maintenance or replacement will the W2E250-CL06-01 need over time?

The 3 µF 400 VDB capacitor (S0 CE rated) is the only wear item; plan to replace it when airflow drops below 35000 m³/h or the motor struggles to start at 0.87 A inrush.

What limit appears first when the W2E250-CL06-01 runs continuously at 2600 rpm?

At 150 W draw and 0.66 A the motor hits its 65 °C ambient ceiling first; beyond that the stall protection trips and speed falls from 2600 rpm.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.