Fans
Fans U7556KX-TPBrand case fan 230V 172×150×55mm 211 CFM 2650 RPM 43/40W
A 230 V AC case fan measuring 172 × 150 × 55 mm, delivering 211 CFM at 2650 RPM with a full-metal frame rated for 80000 hours at 25 °C
- Delivers 211 CFM airflow for strong cooling performance
- Runs at 2650 RPM to maintain consistent air movement
- Operates on 230 V AC supply for direct mains connection
- Built with full metal frame and blades for high-temperature durability
- Rated for 80000 hours service life at 25 °C ambient
Industrial-grade cooling fan
The Fans U7556KX-TPBrand is a 230 VAC axial fan built for industrial enclosures and high-temperature equipment cooling. Its full metal frame and impeller resist corrosion while operating from -40 °C to +75 °C ambient. The unit delivers 211 CFM at 2650 RPM for demanding airflow requirements.
Thermals and power profile
The motor draws 43 W on start-up and settles at 40 W during continuous operation. Insulation withstands 500 V for one minute with leakage current below 0.5 mA. Rated service life reaches 80,000 hours at 25 °C ambient, and the fan tolerates storage temperatures down to -50 °C.
Build integration
The die-cast aluminium frame measures 172 × 150 × 55 mm and mounts via standard bolt patterns for direct panel installation. Counter-clockwise rotation from the blade side directs exhaust airflow through the guard. No low-voltage converter or PWM controller is included, so the installer must provide 230 VAC mains wiring and suitable circuit protection.
Highlights
- Delivers 211 CFM airflow for strong cooling performance
- Runs at 2650 RPM to maintain consistent air movement
- Operates on 230 V AC supply for direct mains connection
- Built with full metal frame and blades for high-temperature durability
- Rated for 80000 hours service life at 25 °C ambient
Specifications
No published specifications for this item yet.
Questions about this item
How do I wire the 230 V AC fan correctly so the blades turn counter-clockwise when viewed from the blade side?
Connect live and neutral to the two supply leads; the motor is designed to rotate counter-clockwise from the blade direction, so no polarity reversal is needed.
What part of this fan is most likely to need replacement after the rated 80 000 hours at 25 °C ambient?
The sleeve bearings inside the motor typically wear first; the all-metal frame and blades are rated for the full service life.
At what ambient temperature does the fan hit its specified operating limit during continuous running?
The motor temperature range tops out at +75 °C; sustained operation above that point exceeds the design limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



