Fans
Fans U60R12MMAB-53 T32 12V .09A 60x60x15mm 3pin case fan
A 60×60×15 mm case fan running at 12 V with a 3-pin connector
- Compact 60 mm square fits tight chassis spaces
- 15 mm slim profile clears low-clearance components
- 12 V .09 A draw keeps power load minimal
- 3-pin connector enables direct motherboard control
NIDEC U60R12MMAB-53 T32 12V case fan
This 60 by 60 by 15 millimetre case fan operates on a 12 volt supply and draws 0.09 amps. It uses a three-pin connector with the original plug design from NIDEC. The compact frame suits tight chassis layouts where larger fans cannot fit. Block 2
Sustained 12 volt operation
At a constant 12 volts the motor runs continuously at its rated 0.09 amp draw without thermal throttling. The sleeve bearing maintains consistent rotational speed during extended duty cycles. Airflow remains steady because the voltage and current do not fluctuate under load. The three-pin header reports speed to the motherboard for closed-loop control.
Highlights
- Compact 60 mm square fits tight chassis spaces
- 15 mm slim profile clears low-clearance components
- 12 V .09 A draw keeps power load minimal
- 3-pin connector enables direct motherboard control
Specifications
No published specifications for this item yet.
Questions about this item
How much noise and heat does the 12 V 0.09 A fan produce when running all day?
The fan operates at 12 V and draws 0.09 A, giving low power consumption and quiet running for continuous use.
What connector must my motherboard or fan controller provide for the 3-pin plug on this 60 mm fan?
A standard 3-pin fan header is required; the fan uses the original 3-pin plug for power and speed signal.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
