Fans
Fans SF6023RH12-52A 60x60x25mm 12V 170mA 3-pin blower case fan
Compact 60×60×25 mm blower moves air through tight server or projector chassis at 12 V and 170 mA via 3-pin connector
- Compact 60 mm square fits tight chassis
- Blower design pushes air through restricted paths
- 12 V 170 mA draws minimal power
- 3-pin connector enables speed monitoring
Compact blower for tight server bays
The SF6023RH12-52A is a 60x60x25mm DC blower that runs on 12V and draws 170mA. Its three-wire, three-pin connector provides a tachometer signal for speed monitoring. The unit is designed as a direct replacement for the Projector TDP-EX20U and similar space-constrained server chassis.
Three-pin tachometer enables monitoring
The 3-pin interface lets the host system read fan speed so alerts can trigger before overheating occurs. No PWM control wire is present, so voltage regulation is the only speed-adjustment method. Buyers who need PWM duty-cycle control or a larger airflow envelope should look elsewhere.
Highlights
- Compact 60 mm square fits tight chassis
- Blower design pushes air through restricted paths
- 12 V 170 mA draws minimal power
- 3-pin connector enables speed monitoring
Specifications
No published specifications for this item yet.
Questions about this item
Will the sleeve bearing in this SF6023RH12-52A blower need relubrication or replacement?
The sleeve bearing is sealed for life; when noise or vibration appears after extended use the fan is simply replaced.
What thermal limit appears first when this 12 V 170 mA blower runs continuously at full speed?
The motor hits its rated 12 V / 170 mA ceiling, so sustained operation is capped by that power envelope.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



