We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal axial fan with braided blades and integrated motor

Fans

Fans S6E450-AF08-29/F04 AC axial fan 230 V 50 Hz 890 rpm 140 W

SKU CH-HPFM-FHKBM

AC axial fan delivers 890 rpm airflow at 230 V 50 Hz with 140 W power consumption

  • Space-saving design with fully integrated motor
  • Reliable operation from impedance-protected motor
  • Thermal overload protector prevents motor damage
  • Wide temperature range from -25 °C to 40 °C
  • 140 W power consumption at 230 V AC

S6E450-AF08-29/F04 AC axial fan

The S6E450-AF08-29/F04 is a 230 V AC axial fan designed for industrial cooling and ventilation. It suits engineers and maintenance teams who need a compact, integrated motor unit for continuous airflow in cabinets or machinery. The fan operates at 50 Hz with a nominal speed of 890 rpm and draws 140 W. Buyers who require DC voltage input or variable PWM control will need a different product type.

Replaces worn 230 V AC fans in existing housings

This unit serves as a direct swap for failed 230 V AC axial fans of matching frame and mounting pattern. The jump is worth it when the original motor shows thermal overload symptoms or when impedance protection is absent in the old design. The integrated motor and braided steel blades reduce the parts count compared to separate motor-and-impeller assemblies. Installers without a matching capacitor value should verify the 4 µF requirement before ordering.

Simple panel mount with capacitor wiring

Installation consists of securing the fan to the panel cut-out and connecting the 230 V supply alongside the 4 µF 400 VDB capacitor. The thermal overload protector is built into the motor, so no external sensor wiring is needed. What usually goes wrong is omitting the capacitor or using an undersized voltage rating, which prevents start-up or causes premature winding failure. Polarity on the AC supply is irrelevant, but the capacitor terminals must be observed.

Highlights

  • Space-saving design with fully integrated motor
  • Reliable operation from impedance-protected motor
  • Thermal overload protector prevents motor damage
  • Wide temperature range from -25 °C to 40 °C
  • 140 W power consumption at 230 V AC

Specifications

No published specifications for this item yet.

Questions about this item

What mounting depth does the 450 mm frame require?

The motor is fully integrated into the fan housing, saving space for installations where depth is limited.

How do I wire the 4 µF 400 V capacitor that ships with the unit?

Connect the capacitor across the motor windings as shown in the manufacturer wiring diagram; incorrect polarity will prevent the 0.62 A run current from stabilising.

When should I replace the 4 µF capacitor on this 230 V AC fan?

Replace the capacitor if the fan fails to start at 0.9 A inrush or if speed drops below the rated 890 rpm under normal load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.