Fans
Fans RF3D-146-180 blower 146mm 230V 230W 1.4A 2694rpm
A 230 V centrifugal blower with a 146 mm impeller spinning at 2694 rpm, drawing 1.4 A and rated at 230 W for ACS800 inverter cooling
- Delivers 230 W cooling power for ACS800 inverter drives
- Spins at 2694 rpm to move air through tight enclosures
- 146 mm blade diameter fits standard centrifugal fan mounts
- Runs on 230 V AC at 1.4 A for direct mains connection
- Suited for medical, rail, EV and industrial cooling applications
230 V centrifugal blower for ACS800 drives
This 230 V centrifugal blower is built for ABB ACS800 inverter cooling. It delivers 230 W motor power at 1.4 A and spins at 2694 rpm with a 146 mm blade diameter. The unit suits industrial drives, rail vehicles, medical equipment and new-energy vehicle systems that require direct replacement airflow.
Check voltage current and mounting before ordering
Verify that the target inverter runs on 230 V single-phase supply and can accept a 1.4 A current draw. Confirm the physical mounting pattern matches the original fan housing and that the blade diameter clearance fits the existing ductwork. Ensure the drive model appears in the supported ACS800 series list.
Fits ACS800 inverter bays
The blower slides into the standard ACS800 inverter fan bay without adapter brackets. Its centrifugal design pushes air through the heatsink channel, leaving the top and side panels free for other components. Direct replacement avoids rewiring and reduces downtime during scheduled drive servicing.
Highlights
- Delivers 230 W cooling power for ACS800 inverter drives
- Spins at 2694 rpm to move air through tight enclosures
- 146 mm blade diameter fits standard centrifugal fan mounts
- Runs on 230 V AC at 1.4 A for direct mains connection
- Suited for medical, rail, EV and industrial cooling applications
Specifications
No published specifications for this item yet.
Questions about this item
Does the RF3D-146-180 blower ship with mounting hardware or a power cord, or must those be sourced separately?
The unit is supplied as the blower only; mounting brackets, wiring harnesses and a 230 V power cord are not included and must be obtained separately.
The listing shows model codes RF3D-146-180 K506 and DSF-2326 — which one should I select for an ACS800-07-0610-3 inverter?
RF3D-146-180 K506 DSF-2326 is the exact part referenced for the ACS800-07-0610-3 drive; choose that full designation to ensure correct fit and electrical match.
With a 1.4 A draw at 230 V and 2694 rpm, what cooling capacity does this blower deliver inside an ACS800 inverter cabinet?
At 230 W motor power and 2694 rpm the fan moves sufficient airflow to keep the ACS800 inverter’s heatsink within thermal limits under rated load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
