We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial radial fan with aluminium backward-curved blades, 500 mm diameter, IP54 housing, 800 mm cable

Fans

Fans R6D500-AK03-01 power inverter

SKU CH-HZQM-RENJ9

A 520 W, IP54 radial fan with external-rotor asynchronous motor, 6000 m³/h airflow and thermal-contact protection for industrial cooling

  • High airflow 6000 m³/h cools demanding drives
  • 520 W motor delivers strong radial flow
  • IP54 enclosure resists dust and water ingress
  • Thermal contact enables external motor protection
  • Wide -40 °C to +60 °C operating range

High-voltage radial inverter fan for industrial

This 520 W radial fan operates on three-phase 230/400 VAC at 50 Hz and delivers 6000 m³/h airflow at 915 rpm. It is built for drive cooling in rail, medical, industrial and new-energy vehicle applications where continuous high-volume air movement is required.

IP54 motor with thermal-contact leads and 800 mm

The external-rotor asynchronous motor carries an IP54 rating and insulation class F, with ball bearings rated for -40 °C to +60 °C. Thermal-contact leads must be wired to an external motor-protection relay before commissioning, and the 800 mm cable length fixes the mounting distance to the terminal box.

Verify three-phase supply.

Confirm the site provides 3~230/400 VAC D/Y at 50 Hz and that the motor-protection relay matches the 2.0/1.2 A rated current. The impeller rotates clockwise when viewed from the cable side; reversed phase sequence will reduce airflow and overheat the motor.

Highlights

  • High airflow 6000 m³/h cools demanding drives
  • 520 W motor delivers strong radial flow
  • IP54 enclosure resists dust and water ingress
  • Thermal contact enables external motor protection
  • Wide -40 °C to +60 °C operating range

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the R6D500-AK03-01 fan is running correctly after installation?

Check that the impeller rotates clockwise at 915 rpm, draws 2.0/1.2 A at 230/400 VAC, and delivers 6000 m³/h airflow; the thermocontact leads must connect to external motor protection.

What comes in the box with the R6D500-AK03-01 and what must I source separately?

The unit ships as a radial impeller without housing, with an 800 mm cable attached; you must supply the mounting housing, 3-phase 230/400 VAC supply, and external thermocontact motor-protection relay.

Which model should I choose among the listed variants for 520 W high-voltage drive cooling?

Select R6D500-AK03-01 for 520 W, 6000 m³/h, IP54, -40…+60 °C operation; other codes such as A4D350-AP08-16 or G2E133-DN77-01 have different power, voltage or airflow ratings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.