We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Centrifugal fan with 560mm blade diameter, metal housing

Fans

Fans R3G560-RB32-10Motor air purifier

SKU CH-XTX6-0HJVW MPN R3G560-RB32-10Motor

A 560 mm centrifugal fan rated at 2900 W and 400 V for industrial air purification

  • High motor power drives demanding air purification tasks with 2900 W rating
  • 400 V three-phase supply suits industrial and computer-room installations
  • 560 mm blade diameter moves large air volumes at 1650 rpm
  • Centrifugal fan design from ebm-papst provides focused airflow for cooling and filtration
  • Wide application range covers medical, rail, industrial and new-energy vehicle environments

Industrial Centrifugal Fan

The Fans R3G560-RB32-10Motor is a 400 V centrifugal fan rated at 2900 W and 4.43 A, built by ebm-papst for computer-room air purification. It suits facility engineers who need continuous high-volume airflow in medical, rail, hotel, industrial, supermarket or new-energy-vehicle environments.

Upgrade from Smaller Units

Replacing a lower-power fan becomes worthwhile when the installation demands 1650 r/min speed and a 560 mm blade diameter to move the required air volume. The jump is justified where existing 230 V or lower-wattage models cannot maintain pressure across long duct runs or dense filter banks.

Integration Requirements

The unit fits three-phase 400 V supplies and draws 4.43 A, so the electrical infrastructure must provide that voltage and current without additional conversion. Its centrifugal design frees up duct layout options by generating higher static pressure than axial alternatives of similar frame size.

Highlights

  • High motor power drives demanding air purification tasks with 2900 W rating
  • 400 V three-phase supply suits industrial and computer-room installations
  • 560 mm blade diameter moves large air volumes at 1650 rpm
  • Centrifugal fan design from ebm-papst provides focused airflow for cooling and filtration
  • Wide application range covers medical, rail, industrial and new-energy vehicle environments

Specifications

No published specifications for this item yet.

Questions about this item

What mounting space does the 560 mm blade diameter require?

The centrifugal fan has a 560 mm blade diameter, so allow clearance for that full sweep plus the motor housing when planning the installation cut-out or duct connection.

How is the 400 V three-phase supply wired to the motor terminals?

Connect the three phases to the motor's terminal block in the correct rotation sequence; the common mistake is reversing two phases, which makes the impeller run backwards and cuts airflow.

When should the bearings on the 2900 W motor be inspected?

Schedule bearing inspection at the intervals recommended by ebm-papst for continuous 1650 r/min operation; replace them if vibration or noise increases beyond the manufacturer's limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.