We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Centrifugal fan with metal housing and impeller, 225 mm diameter, 99 mm depth

Fans

Fans R2E225-RA92-09 centrifugal case fan 230 V AC 1195 m3/h 2500 rpm ball bearing

SKU CH-7D3F-14BQV

A 230 V AC centrifugal case fan delivering 1195 m3/h airflow at 2500 rpm with ball bearing

  • High airflow of 1195 m3/h cools demanding equipment
  • 230 V AC supply fits standard mains wiring
  • Centrifugal blower design directs air through ducts efficiently
  • Ball bearing rated for continuous 2500 rpm operation
  • Compact 225 mm diameter suits tight enclosure spaces

Industrial centrifugal blower

The Fans R2E225-RA92-09 is a 230 V AC centrifugal case fan built for equipment that demands directed, high-pressure airflow. It suits industrial cabinets, medical devices, rail-vehicle systems and other embedded enclosures where axial fans cannot overcome internal resistance. The blower delivers 1195 m3/h at 2500 rpm using a ball-bearing motor rated for continuous operation.

Upgrade from axial fans

Choose this blower when an axial fan of similar diameter cannot push air through dense heatsinks, filters or long duct runs. The centrifugal design develops higher static pressure, so the jump is worth it whenever airflow must turn ninety degrees or travel through restricted paths. It replaces smaller AC blowers that no longer meet the thermal load of upgraded electronics.

Integration requirements

The 225 mm diameter by 99 mm depth housing needs a matching cut-out and secure mounting points that can handle the motor weight and vibration. Wiring must accommodate 230 V AC supply with appropriate protection and isolation for the target application. The outward radial exhaust frees up axial space behind the fan, allowing tighter component stacking in the cabinet depth.

Highlights

  • High airflow of 1195 m3/h cools demanding equipment
  • 230 V AC supply fits standard mains wiring
  • Centrifugal blower design directs air through ducts efficiently
  • Ball bearing rated for continuous 2500 rpm operation
  • Compact 225 mm diameter suits tight enclosure spaces

Specifications

No published specifications for this item yet.

Questions about this item

What diameter and depth clearance does the 225 mm centrifugal fan need for mounting?

The blower measures 225 mm in diameter and 99 mm deep, so allow at least that much space in the enclosure.

How is the 230 V AC supply connected to the R2E225-RA92-09, and what wiring mistake should be avoided?

Connect live and neutral to the two supply leads; do not apply DC voltage or the motor will not start.

When should the ball bearings in this 2500 rpm fan be inspected or replaced?

Ball bearings typically run for years; plan a check if vibration or noise increases noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.