Fans
Fans MB40201VX-0000-G99 40x40x20mm 12V 1.38W case fan
A 40 mm square axial fan with speed signal runs on 12 V and draws 1.38 W
- DC 12 V operation for standard motherboard headers
- 38 W power draw keeps energy use low
- 40 × 40 × 20 mm size fits tight 4 cm mounting spots
- Speed signal output enables RPM monitoring and control
40 mm DC axial case fan
This 40 mm DC axial case fan runs on 12 V and draws 1.38 W. It includes a speed-signal lead so the motherboard or fan controller can monitor rotation. The frame measures 40 by 40 by 20 mm, making it suitable for tight chassis spots or targeted component airflow. It is sold as a single unit.
Check mounting holes and connector
Verify that your case or heatsink has 40 mm mounting holes with the standard spacing. Confirm the fan header on your board supplies 12 V and accepts a three-pin speed-signal connector. Ensure there is 20 mm depth clearance behind the mounting surface. Buyers needing higher airflow or larger frame sizes should look at other models.
Highlights
- DC 12 V operation for standard motherboard headers
- 38 W power draw keeps energy use low
- 40 × 40 × 20 mm size fits tight 4 cm mounting spots
- Speed signal output enables RPM monitoring and control
Specifications
No published specifications for this item yet.
Questions about this item
Does the MB40201VX-0000-G99 fan include mounting screws or a power cable in the box?
The listing shows one 40x40x20mm axial fan with a speed signal wire; mounting hardware and extra cables are not included.
Is the 12V 1.38W version the only option available for this 40mm model?
Yes, the product is offered solely as a 12V DC unit rated at 1.38W with a speed signal output.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



