Fans
Fans M4Q045-DA01-01Current industrial cooling fan 70/18W 230V
A 230 V industrial cooling fan with dual-speed operation at 1300 and 1550 RPM and airflow up to 3500 m³/h
- High airflow up to 3500 m³/h for effective cooling
- Dual-speed operation at 1300 and 1550 RPM for flexible performance
- Low power draw of 18 W at reduced speed saves energy
- Compact 1.53 kg design fits tight installation spaces
- 100 % speed control via analog or serial interface
Industrial cooling fan for commercial refrigeration
The ebmpapst M4Q045-DA01-01Current is a 230V industrial cooling fan rated at 70/18W with airflow up to 3500m3/h. It suits supermarket freezers, medical equipment, rail vehicles and other forced-air cooling tasks where reliable continuous operation is required.
Simple installation with plug-and-play wiring
The fan uses an external rotor motor with a compact design and sturdy steel plate for straightforward mounting. Oil bearings support 100% speed control via analog or serial interface, and matched open-loop components reduce start-up complexity for technicians.
Verify voltage, frequency
Confirm your system supplies 230V at 50Hz or 60Hz and can deliver 0.48A or 0.42A depending on speed setting. Check that the 1.53kg weight and 1300/1550RPM operating range fit the existing bracket and airflow requirements of your equipment.
Highlights
- High airflow up to 3500 m³/h for effective cooling
- Dual-speed operation at 1300 and 1550 RPM for flexible performance
- Low power draw of 18 W at reduced speed saves energy
- Compact 1.53 kg design fits tight installation spaces
- 100 % speed control via analog or serial interface
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the fan is running at the correct 1300 or 1550 RPM after installation?
Measure the shaft speed with a tachometer; it should read 1300 RPM at 50 Hz or 1550 RPM at 60 Hz.
What items are included in the box and what extra parts are needed for wiring?
The package contains the 1.53 kg motor-fan unit only; a mains cable, connector or terminal block must be sourced separately.
Should I choose the 70 W or 18 W operating point for my application?
Select 70 W at 50 Hz for maximum airflow up to 3500 m³/h, or 18 W at 60 Hz for lower power consumption.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
