Fans
Fans KDE2405PFB1-8Dimensions 50x50x10mm DC24V 1.0W 5000RPM case fan
A 50 × 50 × 10 mm DC 24 V axial fan with ball bearing, 1.0 W power draw and 5000 RPM speed for compact case cooling
- Compact 50 mm frame fits tight spaces
- Ball bearing supports 5000 RPM reliability
- DC 24 V 1.0 W keeps power draw low
- Axial design moves air efficiently through heat exchangers
- 042 A current enables precise speed control
Compact axial fan for tight spaces
The SUNON KDE2405PFB1-8 measures 50 by 50 by 10 millimetres and runs on 24 volt DC power. It draws 0.042 amperes at 1.0 watt while spinning at 5000 RPM. This axial design suits equipment that needs directed airflow in a shallow profile.
Ball bearing and low installation depth
A ball bearing supports the rotor for durable operation in continuous duty cycles. The 10 millimetre frame depth allows mounting where larger fans cannot fit. Low noise output and high efficiency make it practical for heat exchanger airflow in industrial or embedded systems.
Replaces larger or noisier axial units
Builders upgrading from bulkier fans gain space without sacrificing airflow capacity up to 35000 cubic metres per hour. The jump is worthwhile when a compact footprint and quiet running are required but the existing mounting pattern matches the 50 millimetre square frame.
Highlights
- Compact 50 mm frame fits tight spaces
- Ball bearing supports 5000 RPM reliability
- DC 24 V 1.0 W keeps power draw low
- Axial design moves air efficiently through heat exchangers
- 042 A current enables precise speed control
Specifications
No published specifications for this item yet.
Questions about this item
What connector standard does the 24 V DC fan use and what current does it draw?
The fan runs on 24 V DC and draws 0.042 A, so any 24 V header or supply rated for at least that current will power it.
What are the exact mounting dimensions of the 5010 frame?
The housing measures 50 mm by 50 mm with a 10 mm thickness, matching the standard 5010 mounting pattern.
How is the KDE2405PFB1-8 installed and which step is often missed?
Mount the fan with four screws through the corner holes, then connect the two-wire lead to a 24 V source; the step often missed is verifying polarity before powering on.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114981BTC
In stock
