We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square axial fan with three-pin connector

Fans

Fans KD1204PKB1 40x40x20mm 12V 1.1W 7050rpm 3-wire case fan

SKU CH-130M-D0R2G

A 40×40×20 mm 12 V case fan with double ball bearings, 7050 rpm, 9.0 CFM airflow and 31 dBA noise

  • 12 V rated voltage with 4–13 V operating range
  • 7050 rpm maximum speed for strong airflow
  • 0 CFM air volume moves heat efficiently
  • 31 dBA noise level keeps system quiet
  • 100000 hour rated life with double ball bearing

Compact 40 mm axial fan

The SUNON KD1204PKB1 is a 40 x 40 x 20 mm axial fan built for tight enclosures that need forced airflow. It runs on 12 V with a 4 V to 13 V operating range and draws 1.1 W. The three-pin connector provides speed monitoring for motherboard headers.

Thermals and acoustics

Double ball bearings support a rated speed of 7050 rpm, settling to 6200 rpm after acceleration and deceleration phases. Airflow reaches 9.0 CFM while noise stays at 31 dBA. Continuous operation is rated for 100,000 hours.

Mounting and daily use

The slim 20 mm depth fits shallow chassis and heat-exchanger stacks without protruding. Sturdy steel frame construction resists vibration in industrial or embedded systems. Standard three-pin layout ensures plug-and-play compatibility with existing fan headers.

Highlights

  • 12 V rated voltage with 4–13 V operating range
  • 7050 rpm maximum speed for strong airflow
  • 0 CFM air volume moves heat efficiently
  • 31 dBA noise level keeps system quiet
  • 100000 hour rated life with double ball bearing

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 40x40x20mm 12V fan and what step is often missed?

Mount the fan using four screws through the 40mm frame, connect the three-pin connector to a motherboard header for speed monitoring, and ensure airflow direction matches the arrow on the housing — the step often missed is verifying the motherboard detects the tachometer signal in BIOS.

What maintenance or replacement will the double ball bearing fan need later?

The double ball bearing is rated for 100,000 hours of continuous operation; after that period the bearing may develop noise or vibration, at which point the entire 40x40x20mm unit should be replaced rather than lubricated.

What limit appears first when the fan runs continuously at 7050 rpm?

Continuous operation at 7050 rpm and 31 dBA will reach the 100,000-hour bearing life rating before thermal or voltage limits become an issue, assuming the supply stays within the 4V-13V working range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.