We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 80 mm case fan with transparent blades and four mounting holes

Fans

Fans JF0825S1S 8025 12V 0.26A case fan

SKU CH-DV9B-5JT29

An 80 mm case fan running on 12 V at 0.26 A for standard chassis cooling

  • 12 V power draws only 0.26 A for efficient cooling
  • 80 x 25 mm frame fits standard 80 mm case mounts
  • Ball-bearing motor rated for continuous 12 V operation
  • JAMICON build quality backs long-term reliability
  • Component first listed by manufacturer in 2021

Compact 12 V 80 mm case fan

The JAMICON JF0825S1S 8025 is a 12 V case fan drawing 0.26 A for basic chassis airflow. It suits builders who need a simple replacement or supplementary cooler in a standard mounting pattern. The unit is supplied new and ready to install.

12 V 0.26 A power envelope

Operation is limited to the rated 12 V supply and 0.26 A current draw, so the fan must connect to a header or controller that respects those figures. No PWM or variable-speed signalling is documented, so speed control depends on voltage regulation alone. Builders requiring automated fan curves should verify header compatibility before fitting.

Modest airflow for tight spaces

The compact frame delivers enough air movement for low-heat components or auxiliary ventilation in small enclosures. It will not satisfy high-static-pressure demands such as dense radiator stacks or heavily restricted front panels. Users targeting silent operation or high thermal loads should consider larger or higher-specification alternatives.

Highlights

  • 12 V power draws only 0.26 A for efficient cooling
  • 80 x 25 mm frame fits standard 80 mm case mounts
  • Ball-bearing motor rated for continuous 12 V operation
  • JAMICON build quality backs long-term reliability
  • Component first listed by manufacturer in 2021

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 8025 model or a different size for my case?

The 8025 designation means an 80 mm frame and 25 mm thickness, so verify your mounting points match those dimensions before ordering.

What does the 0.26A current draw mean for my power supply?

At 12 V the fan pulls 0.26 A, a modest load that most PSU fan headers or molex adapters can supply without issue.

Does the 3-pin connector limit speed control compared to PWM?

The three-pin connection allows voltage-based speed regulation; the motherboard can still lower the voltage to reduce RPM, but it cannot send a PWM duty-cycle signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Case Fans

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.