We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fans

Fans G2E133-DN77-01 centrifugal blower 88W 0.39A

SKU CH-R7V5-D7WXW

Centrifugal blower runs at 230 VAC, 50/60 Hz, drawing 0.39 A at 88 W with 2150 rpm speed

  • 88 W power draw keeps energy use low
  • 39 A current at 230 V simplifies circuit planning
  • 2150 rpm at 50 Hz delivers strong airflow
  • CE approval confirms safety compliance
  • 25 °C to 55 °C range suits harsh environments

G2E133-DN77-01 centrifugal blower

The G2E133-DN77-01 is a new centrifugal blower rated at 88 W and 0.39 A for 230 V AC 50 Hz operation. It suits HVAC technicians and system integrators who need a compact, CE-approved air mover for cooling or ventilation duties.

Single-phase AC motor with 22 µF capacitor

The unit runs directly from single-phase mains and includes a 22 µF, 450 VDB run capacitor. Its external-rotor motor sits inside the impeller for forced electronic cooling, so no separate scroll housing or external fan controller is required in the assembly.

88 W at 2150 rpm with 55 °C ambient limit

At 50 Hz the blower draws 88 W and spins at 2150 rpm while tolerating ambients up to 55 °C. At 60 Hz power rises to 110 W and current to 0.49 A, with the ambient ceiling dropping to 50 °C; continuous operation beyond these thermal limits is not supported.

Highlights

  • 88 W power draw keeps energy use low
  • 39 A current at 230 V simplifies circuit planning
  • 2150 rpm at 50 Hz delivers strong airflow
  • CE approval confirms safety compliance
  • 25 °C to 55 °C range suits harsh environments

Specifications

No published specifications for this item yet.

Questions about this item

How hot can the surrounding air get before the blower reaches its thermal limit?

The blower is rated for a maximum ambient temperature of 55 °C at 50 Hz and 50 °C at 60 Hz.

What is the power draw and speed when the unit runs continuously at 230 V?

At 50 Hz it draws 88 W and spins at 2150 min-1; at 60 Hz it draws 110 W and spins at 2100 min-1.

Which capacitor must already be installed for the motor to start and run?

A 22 µF capacitor rated at 450 VDB is required for operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.