Fans
Fans FP-108 172x150x51mm 38W 2700-3100RPM 5.37/6.88M3/min case fan
A 172x150x51mm AC220V case fan delivering 5.37/6.88M3/min airflow at 2700-3100RPM with ball bearings
- High airflow of 5.37 to 6.88 cubic metres per minute for effective cooling
- Ball bearing design provides long life and low noise operation
- Wide voltage range from 185 to 245 volts AC suits varied power supplies
- Durable aluminium alloy frame resists corrosion and moisture in harsh environments
- Operates reliably from minus 20 to 75 degrees Celsius ambient temperature
AC mains powered 172×150×51 mm case fan
This 38 W centrifugal fan runs directly on 110 V, 220 V or 380 V AC and delivers 5.37 to 6.88 m³/min at 2700–3100 RPM. Its die-cast aluminium frame and imported ball bearing are rated for 30 000 hours at 40 °C ambient. The 25 cm lead wires simplify wiring inside industrial cabinets.
Suited for industrial cabinets and rack enclosures
Installers who need mains-voltage cooling for medical, rail, EV-charging or supermarket equipment will find the voltage range of 185–245 V AC and the –20 °C to 75 °C operating span a direct fit. Builders working on standard desktop or server chassis cannot use this unit because it requires AC mains rather than low-voltage DC power.
38 W at 220 V AC with 0.22 A draw
The single figure that decides fit is the 38 W power rating at 220 V AC with a 0.22 A current draw; any project without an AC supply in the 185–245 V window must choose a different fan.
Highlights
- High airflow of 5.37 to 6.88 cubic metres per minute for effective cooling
- Ball bearing design provides long life and low noise operation
- Wide voltage range from 185 to 245 volts AC suits varied power supplies
- Durable aluminium alloy frame resists corrosion and moisture in harsh environments
- Operates reliably from minus 20 to 75 degrees Celsius ambient temperature
Specifications
No published specifications for this item yet.
Questions about this item
What are the mounting dimensions for the 172x150x51mm frame?
The fan frame measures 172mm by 150mm with a 51mm depth, using a black-painted aluminium alloy die-casting structure for corrosion resistance.
How do I wire the 25cm lead wires to a 220V supply?
Connect the lead-type wires directly to a 220V AC source within the 185V to 245V operating range; the unit draws 0.22A at 38W.
When should I replace the ball bearing after 30000 hours at 40°C?
The imported ball bearing is rated for 30000 hours at 40°C ambient; plan replacement once continuous operation approaches this limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



