We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 92 mm frame 38 mm deep axial fan

Fans

Fans FFB0912SHESize 92×92×38 mm 12 V 1.13 A 900–1750 RPM case fan

SKU CH-JG83-2K77M MPN FFB0912SHESize

A 92 mm square, 38 mm deep axial fan running on 12 V at 1.13 A with a 900–1750 RPM speed range for high-volume server cooling

  • High airflow up to 35000 m³/h for demanding cooling
  • Compact 92×92×38 mm frame fits tight server spaces
  • 12 V DC operation with 1.13 A current draw
  • Wide 900–1750 RPM range adapts to thermal load
  • Sturdy steel-plate construction ensures long-term reliability

92 mm DC fan for server airflow

This 92 mm axial fan runs on 12 V DC and draws 1.13 A. It spins between 900 and 1750 RPM with a ±5 % tolerance. The frame measures 92×92×38 mm. It is built for forced electronic cooling in servers and other equipment that need high air volume.

Airflow and speed control limits

Maximum airflow reaches 35 000 m³/h at full speed. Speed can be adjusted across the full range using an analog or serial interface. The motor uses an external rotor design for compact installation depth. Noise stays low while efficiency remains high across the operating range.

Check voltage connector and mounting space

Verify your system supplies 12 V DC and can deliver at least 1.13 A per fan. Confirm the 92 mm square mounting pattern and 38 mm depth fit your chassis or heat exchanger. Ensure the control interface matches your fan controller or motherboard header type.

Highlights

  • High airflow up to 35000 m³/h for demanding cooling
  • Compact 92×92×38 mm frame fits tight server spaces
  • 12 V DC operation with 1.13 A current draw
  • Wide 900–1750 RPM range adapts to thermal load
  • Sturdy steel-plate construction ensures long-term reliability

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 900 RPM or 1750 RPM setting for my build?

The fan runs between 900 and 1750 RPM with a ±5 % tolerance. Use the lower end for quieter operation and the higher end when maximum airflow is needed.

What does the 1.13 A current draw mean for my fan header?

The fan draws 1.13 A at 12 V. Check that your motherboard header or fan controller is rated for at least that current to avoid overload.

How does the 4-pin PWM interface control the 900–1750 RPM range?

The 4-pin PWM connection lets the motherboard vary speed continuously across the 900–1750 RPM range, so the fan only spins as fast as the thermal load requires.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.