We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 60mm PWM case fan with four-wire lead

Fans

Fans DS06025B12U-P021Lead 60×60×25mm 12V 0.7A 5200 RPM case fan

SKU CH-Z12E-9FK2H MPN DS06025B12U-P021Lead

A 60 × 60 × 25 mm 12 V PWM case fan with double ball bearings delivering 25.2 CFM at 5200 RPM and 38 dBA noise

  • PWM speed control matches cooling to workload
  • 5200 RPM airflow delivers 25.2 CFM for tight spaces
  • Double-ball bearing design extends operating life
  • 12 V DC input with 5.0–13.8 V range fits standard headers
  • 38 dBA noise level keeps system acoustics low

60 mm PWM case fan for industrial

This 60×60×25 mm fan runs on 12 V DC with a 4-pin PWM connector for speed control. It draws 0.7 A at full load and reaches 5200 RPM to move 25.2 CFM at 0.25 in H₂O static pressure. Acoustic output is rated at 38 dB-A. Double ball bearings suit continuous-duty applications in medical, rail, industrial and new-energy vehicle equipment.

PWM control limited to 5.0–13.8 V input range

The fan accepts a supply between 5.0 V and 13.8 V, so PWM duty-cycle behaviour is only guaranteed inside that window. Maximum power draw is 8.4 W at 12 V. The 4-wire interface reports tachometer feedback but does not define a minimum start-up voltage; systems that drop below 5 V may fail to spin the rotor reliably.

Verify 60 mm mounting pattern

Check that your chassis or heatsink provides 60 mm screw centres and a standard 4-pin PWM header keyed for 12 V. The 25 mm thickness may conflict with low-profile coolers or tight side-panel clearances. Ensure the motherboard or fan controller can supply at least 0.7 A per header and that the 38 dB-A noise level meets the acoustic target for the intended environment.

Highlights

  • PWM speed control matches cooling to workload
  • 5200 RPM airflow delivers 25.2 CFM for tight spaces
  • Double-ball bearing design extends operating life
  • 12 V DC input with 5.0–13.8 V range fits standard headers
  • 38 dBA noise level keeps system acoustics low

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 12 V 0.7 A version or a lower-voltage model?

This model runs at 12 V with a 0.7 A draw; the voltage range is 5.0-13.8 V, so it suits standard 12 V headers.

What does 5200 RPM mean for airflow and noise in my case?

At 5200 RPM it moves 25.2 CFM at 38 d-BA, giving strong airflow for a 60 mm frame with moderate noise.

How does the 4-pin PWM connector control speed in practice?

The 4-pin PWM header lets the motherboard vary speed from 5.0 V up to 13.8 V, capping at 5200 RPM and 8.4 W.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.