We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium 120x38mm AC axial fan with wire leads

Fans

Fans DP200A 120x38mm 240VAC 117CFM 50dBA 3150RPM 22W Ball Bearing Axial Case Fan

SKU CH-6XZ9-QPVHE

120 mm square AC axial fan moves 117 CFM at 3150 RPM with 50 dBA noise and ball-bearing reliability

  • Delivers 117 CFM airflow for strong cooling
  • Runs on 240 VAC mains without extra power supply
  • Ball bearing rated for long service life
  • 38 mm thick frame fits standard 120 mm mounts
  • Operates at 50 dBA for moderate noise level

120 × 38 mm AC Axial Fan

The Fans DP200A is a 240 VAC axial case fan built on a 120 mm square frame that is 38 mm deep. It delivers 117 CFM of airflow at 3150 RPM while drawing 0.14 A and 22 W. The aluminium housing and ball bearing suit continuous industrial or cabinet cooling duty.

Upgrade from Lower-CFM or Sleeve-Bearing Units

Replacing a fan that moves less air or uses sleeve bearings gains higher static pressure of 0.39 in H2O and longer bearing life at 50 dBA. The jump is worth it when equipment density raises internal temperatures above what a quieter, lower-flow fan can manage.

Mains-Powered Interface Limits

Because the motor runs directly from 240 VAC, it cannot be speed-controlled by a standard PWM header or low-voltage fan controller. Wiring must follow mains-safety practice and the wire-lead termination requires a suitable connector or terminal block for secure installation.

Highlights

  • Delivers 117 CFM airflow for strong cooling
  • Runs on 240 VAC mains without extra power supply
  • Ball bearing rated for long service life
  • 38 mm thick frame fits standard 120 mm mounts
  • Operates at 50 dBA for moderate noise level

Specifications

No published specifications for this item yet.

Questions about this item

What are the exact frame dimensions and mounting hole spacing for the 120 mm x 38 mm housing?

The frame measures 120 mm by 120 mm with a depth of 38 mm; standard 120 mm fan mounting holes align with this square footprint.

How do I wire the AC supply to the wire leads, and what mistake should I avoid?

Connect the leads directly to a 240 VAC supply rated for at least 0.14 A; the common error is applying DC voltage to this AC-only motor.

When should I plan to replace the ball-bearing fan based on its rated speed and airflow?

At 3150 RPM delivering 117 CFM, the ball bearings typically last several years of continuous duty; replace if noise rises above the rated 50 dBA or airflow drops below 0.39 in H2O static pressure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.