Fans
Fans Delta EFB0812EHF-R00 80 mm 12 V 0.68 A 4100 RPM case fan
An 80 mm DC axial fan with double ball bearings spins at 4100 RPM, delivering 62.0 CFM airflow at 45.5 dB-A noise for server and industrial cooling
- High airflow of 62.0 CFM for effective cooling
- Double ball bearing motor ensures long service life
- 4100 RPM speed delivers strong static pressure of 11.5 mm H₂O
- Wide voltage range 7.0V to 13.2V suits varied power supplies
- Compact 80×80×32 mm frame fits standard 80 mm mounts
Delta EFB0812EHF-R00 80 mm Server Fan
The Delta EFB0812EHF-R00 is an 80 mm DC axial flow case fan built for server and industrial cooling. It runs on a nominal 12 V supply and draws 0.68 A for 8.16 W of input power. Double ball bearings support the 4100 RPM rated speed and 120 g net weight.
Suits high static pressure 80 mm bays.
This fan fits 80*80*32 mm mounts that need strong airflow against resistance. The 11.5 mm H₂O static pressure and 62.0 CFM volume serve dense server chassis and drive arrays. Buyers who want low noise should look elsewhere because the 45.5 dB-A rating is noticeable in quiet rooms.
4100 RPM at 12 V decides fit for 80 mm server slots
The single specification that decides compatibility is the 4100 RPM rated speed at the nominal 12 V input. It sets the 62.0 CFM airflow and 11.5 mm H₂O pressure that determine whether the fan clears your component thermal load. Verify the 7.0 V to 13.2 V range matches your header before installing.
Highlights
- High airflow of 62.0 CFM for effective cooling
- Double ball bearing motor ensures long service life
- 4100 RPM speed delivers strong static pressure of 11.5 mm H₂O
- Wide voltage range 7.0V to 13.2V suits varied power supplies
- Compact 80×80×32 mm frame fits standard 80 mm mounts
Specifications
No published specifications for this item yet.
Questions about this item
What power connector does the 12 V 0.68 A Delta EFB0812EHF-R00 require?
The fan runs on DC 12 V and draws 0.68 A through a standard 3-pin or 4-pin PWM header; ensure your motherboard or fan controller supplies 7.0 V to 13.2 V.
Will the 80 mm 4100 RPM unit fit in a chassis designed for 32 mm thick fans?
Yes, the frame measures 80 x 80 x 32 mm, so it matches the 32 mm depth used in many server and industrial enclosures.
How can I confirm the fan is delivering its rated 62.0 CFM at 45.5 dB-A after installation?
Monitor the RPM in BIOS or fan-control software — it should read close to 4100 RPM — and verify airflow direction matches the arrow on the housing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
