Fans
Fans D2E133-AM47-94 230V 1800 RPM 200W centrifugal blower
230 V AC centrifugal blower delivers 300.0 CFM at 1800 RPM with 200 W power and 56 dB(A) noise
- Delivers 300 CFM airflow for efficient ventilation
- Operates at 1800 RPM with 200 W power draw
- Ball bearing design ensures reliable continuous operation
- Wide -40 °C to 80 °C temperature range suits harsh environments
- Compact 171 × 180 × 215 mm footprint fits tight installations
Industrial Centrifugal Blower 230V
The Fans D2E133-AM47-94 is a new 230 VAC centrifugal blower built for industrial cooling and ventilation systems. It moves up to 300.0 CFM at 1800 RPM using a 200 W motor with ball bearings. The unit suits equipment integrators and maintenance teams needing a direct replacement for the EBM-Papst D2E133-AM47-01.
Thermals Noise and Power Draw
Operating temperature spans -40 °C to 80 °C so the blower handles harsh environments without thermal throttling. Acoustic output is rated at 56 dB(A) at full speed while drawing 200 W continuously. Four-lead termination simplifies wiring into existing 230 VAC control circuits.
Upgrade and Replacement Scope
This blower replaces the original D2E133-AM47-01 in HVAC, air-conditioning and material-handling installations where the same 171 mm by 180 mm by 215 mm footprint and 128 mm impeller diameter are required. The jump is worth it when the existing unit has failed or when a new build demands the documented 300.0 CFM airflow at 230 VAC. Buyers needing variable-speed control below 780 RPM or IP68 ingress protection should verify specifications before ordering.
Highlights
- Delivers 300 CFM airflow for efficient ventilation
- Operates at 1800 RPM with 200 W power draw
- Ball bearing design ensures reliable continuous operation
- Wide -40 °C to 80 °C temperature range suits harsh environments
- Compact 171 × 180 × 215 mm footprint fits tight installations
Specifications
No published specifications for this item yet.
Questions about this item
How is the D2E133-AM47-94 mounted and what is the common wiring mistake?
Mount the 171 mm by 180 mm by 215 mm housing using its four corner holes; the common error is connecting the four leads without confirming the 230 VAC supply matches the motor rating.
What maintenance will the ball bearing blower need over its service life?
The ball bearings run from -40 °C to 80 °C; schedule periodic cleaning of the 128 mm impeller and listen for bearing noise that signals replacement.
What is the first limit reached when the blower runs continuously at 1800 RPM?
The 56 dB(A) noise level and 200 W power draw become the practical constraints before the 80 °C ambient ceiling is approached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
