We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mitsubishi inverter fan 80 by 80 by 25 mm 24V 0.13A

Fans

Fans CA1941H01 MMF-08G24ES-CP1 24V 0.13A 80*25 power inverter

SKU CH-XHGN-PCYR7

24 V Mitsubishi inverter cooling fan rated 0.13 A for F740 drives from 7.5 to 18.5 kW

  • Designed for F740 drives from 7.5 to 18.5 kW
  • 24 V 0.13 A input matches original spec
  • 80 × 80 × 25 mm fits standard mounting
  • CP1 plug enables direct replacement
  • Brand-new Mitsubishi part ensures reliable cooling

Mitsubishi Inverter Cooling Fan

The MMF-08G24ES-CP1 is a 24V 0.13A axial fan built for Mitsubishi F740 series inverters rated from 7.5kW to 18.5kW. It serves engineers and maintenance teams who need a direct replacement for the original cooling module.

80mm Square 25mm Thick Form Factor

The fan measures 80 by 80 by 25 millimetres and uses the CP1 plug type specified by the manufacturer. This exact footprint and connector decide whether the unit fits the inverter chassis and wiring harness.

Drop-In Replacement With Original Connector

Installation consists of unplugging the old unit and seating the new one in the same mounting holes using the existing CP1 connector. The only common issue is ordering the wrong plug variant, so verify the CP1 designation before fitting.

Highlights

  • Designed for F740 drives from 7.5 to 18.5 kW
  • 24 V 0.13 A input matches original spec
  • 80 × 80 × 25 mm fits standard mounting
  • CP1 plug enables direct replacement
  • Brand-new Mitsubishi part ensures reliable cooling

Specifications

No published specifications for this item yet.

Questions about this item

What does the 0.13A current draw mean once this fan is installed in a Mitsubishi F740 inverter?

The fan pulls 0.13 amps at 24 volts, so the inverter's internal supply only needs to budget roughly 3 watts for cooling airflow.

What does the CP1 plug standard cap in practice for this inverter fan?

The CP1 connector mates directly with the F740 series header, limiting installation to those Mitsubishi frames that carry the matching socket.

What physical clearance does the 80 by 25 millimetre frame need to fit inside the F740 chassis?

The square 80 millimetre body and 25 millimetre depth slide into the standard F740 fan bay without interfering with adjacent power modules.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.