Fans
Fans AUB0512HHB W401 12V .2A 5015 50x50x15mm 4Pin PWM case fan
A 50×50×15 mm 4-pin PWM case fan running at 12 V and 0.2 A for compact server or chassis cooling
- 12 V PWM control for precise speed adjustment
- 50 x 50 x 15 mm compact frame fits tight spaces
- 4-pin connector enables motherboard fan regulation
- 2 A draw keeps power consumption low
Compact 50 mm PWM fan for tight server builds
This 50 x 50 x 15 mm case fan runs on 12 V DC at 0.2 A and connects through a standard 4-pin PWM header. Its small footprint suits 1U enclosures and other space-constrained chassis where a full-size fan cannot fit.
0.2 A draw limits airflow headroom in high-density
At 0.2 A the motor delivers modest static pressure, adequate for component-level cooling but not for pushing air through dense heatsink arrays or restrictive filters. Builds needing higher CFM or redundant cooling should look for larger-frame alternatives.
Highlights
- 12 V PWM control for precise speed adjustment
- 50 x 50 x 15 mm compact frame fits tight spaces
- 4-pin connector enables motherboard fan regulation
- 2 A draw keeps power consumption low
Specifications
No published specifications for this item yet.
Questions about this item
Will the 4-pin PWM connector on this 5015 fan work with an older motherboard that only has 3-pin headers?
Yes, the 4-pin plug fits a 3-pin header; the fan will run at full 12 V .2 A speed without PWM control.
How can I confirm the AUB0512HHB W401 is spinning correctly after installation?
Check the BIOS or fan-control software for an RPM reading on the corresponding header; a steady value above zero means the PWM signal and power are both working.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



