We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square axial fan with three-pin TAC connector

Fans

Fans AFB1212GHE 120x120x38mm 12V 3.24A 3-pin TAC axial case fan

SKU CH-9GMC-9X5HP

120 mm axial case fan with 38 mm depth, 12 V operation and 3.24 A draw for high airflow cooling

  • 120 mm square frame fits standard case mounts
  • 38 mm thickness allows high-static-pressure airflow
  • 12 V DC input with 3.24 A draw delivers strong cooling performance
  • 3-pin TAC connector provides tachometer feedback for speed monitoring

High-Airflow 120 mm Axial Fan

The Delta AFB1212GHE is a 120 x 120 x 38 mm axial case fan built for demanding thermal loads. It runs on 12 V DC and draws 3.24 A through a 3-pin TAC connector. The thick 38 mm frame houses a powerful motor designed to move large volumes of air through restrictive heatsinks or dense chassis layouts. This new component targets builders who need maximum static pressure in a standard 120 mm mounting footprint.

Suited for high-impedance cooling setups

This fan suits systems where airflow must overcome dense fin stacks, radiator cores or tightly packed drive cages. The high current draw and TAC connector require a header or controller capable of supplying 3.24 A at 12 V. Builders limited to standard low-power headers or 4-pin PWM control should look elsewhere. The 38 mm thickness also demands sufficient clearance behind the mounting surface.

Highlights

  • 120 mm square frame fits standard case mounts
  • 38 mm thickness allows high-static-pressure airflow
  • 12 V DC input with 3.24 A draw delivers strong cooling performance
  • 3-pin TAC connector provides tachometer feedback for speed monitoring

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need a 3-pin TAC header to run this 12V fan?

Yes, the fan uses a 3-pin TAC connector and requires a 12 V DC supply; your board must provide a matching header or an adapter cable.

Can the 38 mm thickness replace a slimmer 120 mm fan in my existing case?

The frame is 38 mm deep, so verify that your chassis or heatsink has enough clearance before swapping out a thinner unit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.