Fans
Fans AFB0612VHC 60×60×15mm 12V 0.36A 5400RPM case fan
A 60 × 60 × 15 mm axial fan delivering 5400 RPM airflow at 38 dB with ball-bearing durability rated for 50000 hours
- High airflow of 27.7 CFM cools tight spaces
- 5400 RPM speed delivers strong static pressure of 62.8 Pa
- Ball bearing rated for 50000 hours of continuous operation
- Low 38 dB noise keeps systems quiet under load
- Compact 60 × 60 × 15 mm frame fits small enclosures
Compact 60 mm Delta AFB0612VHC
This 60 × 60 × 15 mm axial fan runs on 12 V and draws 0.36 A at full speed. It spins at 5400 RPM, delivers 27.7 DBA of airflow and 62.8 Pa of static pressure. A ball-bearing design is rated for 50000 hours of operation. The three-wire connector provides tachometer feedback for speed monitoring.
Ideal for tight server or appliance slots
Builders fitting a 60 mm bay in rack units, industrial enclosures or legacy workstations will match the 6015 form factor and 12 V supply. The 38 dB noise level suits environments where moderate sound is acceptable. Buyers who require four-pin PWM control or lower acoustic output should look elsewhere.
Three-wire 12 V interface decides fit
The fan uses a standard three-pin 12 V header without PWM signalling. If the target board or controller only offers four-pin headers or expects voltage regulation below 12 V, this unit will not provide variable speed. Verify the header type and voltage before ordering.
Highlights
- High airflow of 27.7 CFM cools tight spaces
- 5400 RPM speed delivers strong static pressure of 62.8 Pa
- Ball bearing rated for 50000 hours of continuous operation
- Low 38 dB noise keeps systems quiet under load
- Compact 60 × 60 × 15 mm frame fits small enclosures
Specifications
No published specifications for this item yet.
Questions about this item
Does the AFB0612VHC come with mounting screws or a power cable, or must they be purchased separately?
The fan is supplied as the unit only; mounting hardware and any required cables are not included and must be sourced separately.
How do I choose between the 12 V 0.36 A rating and the 0.24 A actual current listed for this model?
The 0.36 A figure is the rated maximum; the 0.24 A actual draw is typical at 5400 RPM, so size your fan header or controller for the 0.36 A peak.
What does the 5400 RPM speed mean for airflow and noise once the fan is installed in a case?
At 5400 RPM the fan delivers 27.7 CFM with 62.8 Pa static pressure while producing 38 dB, suitable for tight spaces needing focused cooling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114981BTC
In stock
