Fans
Fans ADDA AD0824LB-A70GL 8025 8CM 24V 0.09A 2-wire inverter case fan
An 8 cm axial fan running on 24 V DC with a two-wire connection for inverter and industrial cooling applications
- 24V operation suits industrial power rails
- 09A draw keeps circuit load low
- 80 mm frame fits standard case mounts
- Two-wire design simplifies installation wiring
- Brand-new condition ensures full service life
Industrial axial fan for 24 V systems
The ADDA AD0824LB-A70GL is an 8025-frame DC axial fan rated for 24 V and 0.09 A on a two-wire connection. It is built for equipment that needs steady airflow in medical, rail, industrial-cleaning, new-energy-vehicle or supermarket installations. Buyers who need a PWM or three-wire tachometer signal cannot use this model.
Sustained 24 V operation
The fan draws a constant 0.09 A at its rated voltage, so heat output and airflow remain stable during continuous duty. No thermal-throttling behaviour or speed curves are documented, so performance under variable loads is not defined. Systems that require speed feedback or automatic ramp control must add external monitoring.
Two-wire mounting simplicity
Only power and ground pins are present, making electrical connection straightforward for integrators familiar with 24 V DC distribution. The 8025 frame fits standard cut-outs, but no screw pattern or vibration-isolation details are supplied. Installers must verify mechanical clearance and wiring polarity before powering the unit.
Highlights
- 24V operation suits industrial power rails
- 09A draw keeps circuit load low
- 80 mm frame fits standard case mounts
- Two-wire design simplifies installation wiring
- Brand-new condition ensures full service life
Specifications
No published specifications for this item yet.
Questions about this item
How much heat and noise does the ADDA AD0824LB-A70GL produce when running continuously at 24 V and 0.09 A?
At 24 V and 0.09 A the fan draws minimal power, so heat output and acoustic level stay low during all-day operation.
What voltage source and connector does the 2-wire ADDA AD0824LB-A70GL need to start spinning?
It requires a 24 V DC supply and a standard 2-pin header or lead; no PWM or tachometer wire is present.
Will the 8025 frame and 2-wire interface of this ADDA fan fit the same mounts and headers as older 80 mm case fans I already own?
Yes, the 8025 dimensions match common 80 mm mounting holes and the 2-wire lead connects to legacy 2-pin fan headers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011497BTC
In stock
