Fans
Fans AD0824HB-A70GLVoltage case fan 24V 0.16A 80mm 3200RPM 40-45 CFM
An 80 mm 24 V case fan delivering 40-45 CFM at 3200 RPM with a double ball bearing rated for 60,000 hours
- Air Flow40-45 CFM
- Moves air efficiently at 40-45 CFM for system cooling
- Runs at 3200 RPM with 36 dBA noise level
- Double ball bearing rated for 60000 hours continuous use
- Operates from -30 °C to 75 °C in harsh environments
- Compact 80 mm frame fits tight chassis spaces
24 V 80 mm axial fan
This 24 V axial fan measures 80 mm by 80 mm by 25 mm and spins at 3 200 RPM to deliver 40-45 CFM of airflow. It draws 0.16 A and uses double ball bearings rated for 60 000 hours of continuous operation. The unit suits industrial, medical or embedded systems that require a 24 V DC power source.
Sustained 24-hour operation
Double ball bearings and a 60 000-hour life rating allow the fan to run continuously without the wear seen in sleeve-bearing designs. Noise stays at 36 dBA while airflow remains steady across the -30 °C to 75 °C operating range. The 24 V supply keeps current low at 0.16 A for stable long-term performance.
Check voltage and mounting space
Verify that your system provides a 24 V DC rail and can accommodate an 80 mm square frame with 25 mm depth. The two-wire lead carries 0.16 A, so confirm the header or supply can deliver that current. No PWM or speed-control signal is included, so the fan runs at full speed whenever powered.
Highlights
- Moves air efficiently at 40-45 CFM for system cooling
- Runs at 3200 RPM with 36 dBA noise level
- Double ball bearing rated for 60000 hours continuous use
- Operates from -30 °C to 75 °C in harsh environments
- Compact 80 mm frame fits tight chassis spaces
Specifications
| Air Flow | 40-45 CFM |
|---|
Questions about this item
How loud is the 3200 RPM fan when running continuously?
The fan produces 36 dBA at full speed, which is a moderate hum suitable for server racks or industrial cabinets where background noise is already present.
What power source and connector does the 24 V 0.16 A fan require?
It needs a 24 V DC supply capable of at least 0.16 A and a two-wire lead; no PWM or tachometer wire is included.
Will the 80 mm × 25 mm frame fit the mounting holes on my older 80 mm chassis?
Yes, the 80 mm square frame with 25 mm depth matches the standard 80 mm mounting pattern used on legacy cases and equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
