We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 60 mm PWM case fan, 38 mm thick, black frame, four-wire connector

Fans

Fans AD0618UB-F7BDS 60x60x38mm 18V 1.2A PWM case fan

SKU CH-1YAG-NQ50X

Cools components with a 60 mm PWM fan running at 18 V and 1.2 A

  • PWM control enables precise speed adjustment
  • 18 V power rating supports industrial voltage rails
  • 2 A current draw keeps power consumption low
  • 60 mm square frame fits standard 60 mm mounting points

ADDA AD0618UB-F7BDS 18V PWM fan

This ADDA 60 x 60 x 38 mm case fan runs on 18 V and draws 1.2 A through a four-wire PWM connector. It suits builders who need a compact 6 cm frame for tight chassis layouts or specialised industrial enclosures. The 618 model designation identifies the exact specification for replacement or integration work. Buyers who need a larger frame diameter or a different voltage rail cannot use this unit.

Four-wire PWM control and 38 mm depth

The four-wire interface allows the motherboard or controller to vary speed precisely without voltage manipulation. A 38 mm thickness provides substantial airflow capacity while still fitting the standard 60 mm mounting pattern. The 1.2 A current rating requires a header or supply capable of delivering that load continuously. Installers must verify that their chassis clearance accommodates the full 38 mm depth before purchase.

Highlights

  • PWM control enables precise speed adjustment
  • 18 V power rating supports industrial voltage rails
  • 2 A current draw keeps power consumption low
  • 60 mm square frame fits standard 60 mm mounting points

Specifications

No published specifications for this item yet.

Questions about this item

What does the 4-wire PWM interface let me control on this ADDA AD0618UB-F7BDS fan?

The 4-wire PWM connector allows the motherboard or fan controller to vary the fan speed precisely by sending a pulse-width modulation signal, so the fan runs only as fast as needed for the current thermal load.

Will the 60 mm by 60 mm frame with 38 mm thickness fit my chassis fan mounts?

This fan measures 60 mm square and 38 mm deep, so it fits any standard 60 mm mounting holes with enough clearance for the thicker 38 mm profile; verify your case or heatsink has the matching screw spacing and depth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.