Fans
Fans AA1252MB-ATSize case fan 120×120×25mm 220V 0.11/0.10A 2050/2400RPM 61/69.4CFM 38.7/44.1dBA 50000h
A 120 × 120 × 25 mm 220 V axial fan moves 61–69.4 CFM at 2050–2400 RPM with 38.7–44.1 dBA noise and a 50000-hour rated life
- Air Flow1-5 CFM
- 50 000-hour rated life for long-term reliability
- 7 dBA at 50 Hz for quiet operation
- 4 CFM at 60 Hz delivers strong airflow
- 120 × 120 × 25 mm fits standard mounting points
- 220 V AC supply simplifies mains-powered builds
Industrial axial fan for 220 V environments
The Fans AA1252MB-ATSize is a 120 × 120 × 25 mm axial fan designed for direct connection to 220 V mains at 50 or 60 Hz. It suits industrial equipment, medical devices, rail systems and other installations that require hot or cold air exchange without a separate low-voltage supply.
Sustained airflow at two fixed speeds
At 50 Hz the fan draws 0.11 A and 20.7 W, spins at 2050 RPM and delivers 61 CFM at 3.508 mmAq static pressure. At 60 Hz it draws 0.10 A and 18.4 W, reaches 2400 RPM and provides 69.4 CFM at 3.912 mmAq, giving consistent cooling across both mains frequencies.
Rated noise and long service life
Acoustic output is 38.7 dBA at 50 Hz and 44.1 dBA at 60 Hz under normal operation. The unit is rated for 50000 hours of continuous use in ambient temperatures from -25 °C to 75 °C, and its axial layout keeps installation depth minimal while maintaining efficiency.
Highlights
- 50 000-hour rated life for long-term reliability
- 7 dBA at 50 Hz for quiet operation
- 4 CFM at 60 Hz delivers strong airflow
- 120 × 120 × 25 mm fits standard mounting points
- 220 V AC supply simplifies mains-powered builds
Specifications
| Air Flow | 1-5 CFM |
|---|
Questions about this item
How loud is the AA1252MB-ATSize fan when running continuously at 50 Hz and 60 Hz?
The fan produces 38.7 dBA at 50 Hz and 44.1 dBA at 60 Hz, so expect a low hum that stays consistent during all-day operation.
Does the AA1252MB-ATSize connect to a standard motherboard header or does it need a separate 220 V supply?
It requires a 220 V AC supply at 50/60 Hz drawing 0.11/0.10 A; it does not plug into a 12 V motherboard fan header.
Will the 120 × 120 × 25 mm frame of the AA1252MB-ATSize line up with the mounting holes on my older 120 mm case openings?
Yes, the 120 mm square frame and 25 mm depth match the standard 120 mm mounting pattern used on older cases.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



