We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
170 mm black metal axial fan with lead wires

Fans

Fans A2E170-AF23-01 170x63mm 230VAC 47W 0.23A axial case fan

SKU CH-N618-H85XA

170 mm AC axial fan with 480–565 m³/h airflow, ball bearings and IP44 rating

  • High airflow performance up to 565 m³/h
  • Thermal overload protector prevents motor damage
  • Ball bearing design for reliable operation
  • IP44 rated protection against splashing water
  • Space-saving integrated motor fits tight spaces

Compact 170 mm AC axial fan

The ebm-papst A2E170-AF23-01 is a 170 mm diameter axial fan designed for 230 V AC mains supply. It delivers up to 565 m³/h airflow at 3150 min⁻¹ and carries an IP44 rating. The integrated motor and thermal overload protector suit industrial enclosures and rack cabinets where space is limited and reliability is critical.

Verify voltage and mounting before ordering

Confirm that the installation site provides 230 V AC single-phase power and can accommodate the 170 mm frame with 63 mm depth. The fan draws 0.23 A and 47 W nominal, so wiring and circuit protection must be rated accordingly. Lead-wire termination requires a suitable connector or terminal block, and the IP44 rating demands correct gasket sealing on the mounting surface.

Fits tight enclosures and frees internal space

Because the motor sits inside the fan hub, no external drive assembly is needed, leaving more room for other components inside the cabinet. Ball-bearing construction supports continuous operation at variable speeds. The thermal protector shuts the motor down on overload, reducing the need for separate safety relays in the control circuit.

Highlights

  • High airflow performance up to 565 m³/h
  • Thermal overload protector prevents motor damage
  • Ball bearing design for reliable operation
  • IP44 rated protection against splashing water
  • Space-saving integrated motor fits tight spaces

Specifications

No published specifications for this item yet.

Questions about this item

Does the fan come with mounting screws or a power cord, or do I need to buy them separately?

The fan is supplied with lead-wire termination; mounting hardware and any mains connector must be sourced separately.

The listing shows two airflow and two speed figures — which one applies to my 230 V AC supply?

At 230 V AC the fan delivers either 480 m³/h at 2700 min⁻¹ or 565 m³/h at 3150 min⁻¹ depending on the operating point; both are within the same model's range.

What does the 47 W power rating mean for actual heat dissipation inside my case?

The fan draws 47 W (53 W maximum) from the 230 V AC line, so that amount of electrical power becomes heat inside the enclosure while moving up to 565 m³/h of air.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.