We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular AC axial fan, metal frame, 195 by 73 mm

Fans

Fans A2D200-AH18-01 case fan 195 x 73mm 230/400 V AC 940m3/h 3150rpm

SKU CH-0N22-31Z5Z

Three-phase AC axial fan measuring 195 x 73 mm, delivering 940 m³/h airflow at 3150 rpm from a 230/400 V supply

  • High airflow capacity supported by 940 m³/h rating
  • Three-phase 230/400 V AC supply fits industrial power systems
  • Wide operating range from -25 °C to 45 °C ambient
  • Compact 195 × 73 mm frame saves installation space
  • CE certified for European safety compliance

Industrial three-phase axial fan

The Ebmpapst A2D200-AH18-01 is a 195 by 73 millimetre axial fan built for equipment that moves large volumes of air through heat exchangers or dense enclosures. It runs on three-phase 230 or 400 volt AC mains at 50 or 60 hertz and delivers up to 940 cubic metres per hour at 3150 revolutions per minute. The design targets integrators who need high static pressure in a shallow mounting depth.

Three-phase mains constraints

Operation is fixed to 50 or 60 hertz three-phase supply with Y wiring; speed varies between 2600 and 2900 rpm depending on frequency and voltage. Power draw ranges from 68 to 70 watts with a current draw of 0.17 to 0.13 amperes. Maximum back pressure is 140 pascals. The fan cannot be speed-controlled from a single-phase source or PWM header without an external drive. Ambient limits are minus 25 to plus 45 or 70 degrees Celsius depending on operating point.

Steel frame and terminal-box mounting

A sturdy steel plate housing protects the external-rotor motor and suits industrial rack or panel cut-outs. Electrical connection is made through a terminal box on the frame, not a plug, so wiring must be terminated on site. The compact depth eases installation in tight ducts, but the 195 millimetre square footprint and three-phase cabling require deliberate layout planning. No mounting screws or vibration isolators are mentioned.

Highlights

  • High airflow capacity supported by 940 m³/h rating
  • Three-phase 230/400 V AC supply fits industrial power systems
  • Wide operating range from -25 °C to 45 °C ambient
  • Compact 195 × 73 mm frame saves installation space
  • CE certified for European safety compliance

Specifications

No published specifications for this item yet.

Questions about this item

This fan is listed at 940 m³/h and 3150 rpm — is that the only capacity available?

The supplier title specifies a single configuration of 940 m³/h airflow at 3150 rpm for the A2D200-AH18-01 model.

What does 940 m³/h actually deliver inside a typical enclosure?

At 50 Hz the fan runs at 2600 rpm and moves up to 940 m³/h, producing 140 Pa of static pressure for forced air cooling through heat exchangers.

The nameplate shows 230/400 V AC — how is it wired and what limits apply?

It is a three-phase Y-wired motor rated for 400 V AC at 50/60 Hz, drawing 0.17 A at 50 Hz and 0.13 A at 60 Hz with 68–70 W consumption.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.