We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black metal axial fan 172 by 151 by 51 mm with wire leads

Fans

Fans A17251-V2HBTPForm 172×151×51 mm case fan 2800 RPM 230 CFM 230 V 50/60 Hz

SKU CH-VM16-5KWW3 MPN A17251-V2HBTPForm

A 172 × 151 × 51 mm axial fan moves 230 CFM at 2800 RPM on 230 V 50/60 Hz power

  • RPM2000-2499 RPM
  • High airflow of 230 CFM for effective cabinet cooling
  • 2800 RPM delivers strong static pressure of 0.68 Inch-H₂O
  • 27 W power draw at 230 V keeps energy use low
  • Ball bearing construction rated for continuous industrial operation
  • Compact 172×151×51 mm frame fits standard network enclosures

Industrial cabinet cooling fan

The Fans A17251-V2HBTPForm is an AC axial fan built for network cabinets and industrial enclosures. It runs on 230 V at 50/60 Hz and delivers 230 CFM of airflow at 2800 RPM. The ball-bearing design supports continuous operation in demanding environments.

Upgrade from lower-CFM axial units

Replacing a fan rated below 230 CFM or 0.68 Inch-H2O static pressure closes the gap when equipment runs hotter or cabinet density increases. The jump is worth it when the existing 230 V supply cannot be changed and a direct dimensional fit is required.

Suits rack and cabinet integrators

This unit fits builders who need a 172×151×51 mm footprint with 27 W draw and 52 dBA output. Buyers who need variable-speed PWM control, lower noise levels, or DC voltage input should look at something else.

Highlights

  • High airflow of 230 CFM for effective cabinet cooling
  • 2800 RPM delivers strong static pressure of 0.68 Inch-H₂O
  • 27 W power draw at 230 V keeps energy use low
  • Ball bearing construction rated for continuous industrial operation
  • Compact 172×151×51 mm frame fits standard network enclosures

Specifications

RPM2000-2499 RPM

Questions about this item

What mounting holes or frame dimensions does the 172×151×51 mm fan require?

The fan measures 172 mm length, 151 mm width and 51 mm thickness; mount it to a panel cut-out matching those dimensions using the four corner holes on the 172 mm by 151 mm frame.

How do I wire the 230 V AC fan and what polarity mistake should I avoid?

Connect live and neutral to the two lead wires — there is no polarity, but do not apply DC voltage or a PWM signal; the motor runs directly on 230 V 50/60 Hz mains.

When should I plan to replace the ball-bearing fan running at 2800 RPM?

Expect bearing wear after several years of continuous 2800 RPM operation; replace the unit when noise rises above the rated 52 dBA or airflow drops below 230 CFM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.