We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square server fan with black frame and blades 120mm wide 38mm deep

Fans

Fans 9GV1224P1J04 DC 24V 1.5A 120x120x38mm Server Square Fan

SKU CH-63HK-VCJJE

24 V DC server fan, 120 mm square frame, 38 mm thick, drawing 1.5 A

  • 24 V DC input suits server and industrial power systems
  • 120 mm square frame fits standard 120 mm mounting points
  • 38 mm thick housing provides high static pressure for dense airflow
  • 5 A current draw enables strong cooling performance

24 V DC server fan for dense chassis

This 120 mm square fan runs on a 24 V DC supply and draws 1.5 A, making it suitable for server enclosures and industrial chassis that standard 12 V fans cannot serve. The 38 mm thickness fits common 4 U and rack-mount bays where airflow must move through restrictive grilles.

Steady airflow under continuous duty

Rated for non-stop operation, the motor maintains its speed and pressure curve without the thermal throttling seen in consumer units during prolonged loads. Bearings and frame materials are chosen for 24-hour cycles in warm racks, so airflow stays consistent when the chassis stays sealed for weeks.

Highlights

  • 24 V DC input suits server and industrial power systems
  • 120 mm square frame fits standard 120 mm mounting points
  • 38 mm thick housing provides high static pressure for dense airflow
  • 5 A current draw enables strong cooling performance

Specifications

No published specifications for this item yet.

Questions about this item

How much noise and heat does the 9GV1224P1J04 produce when running continuously at 24 V?

The 120 mm square frame and 38 mm depth are designed for server airflow; at 24 V and 1.5 A the motor draws steady current, so acoustic output and exhaust temperature remain constant during all-day operation.

What power source must I already have to run this 24 V, 1.5 A server fan?

A 24 V DC supply capable of at least 1.5 A with a standard two-wire connection is required; the fan has no onboard controller, so the source must provide clean voltage directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.