We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 60x60x25mm DC fan with transparent blades and two wire leads

Fans

Fans 624HH 60x60x25mm 24V DC 8200rpm 56m3/h case fan

SKU CH-XC9D-HVBW8

A 60 x 60 x 25 mm, 24 V DC case fan delivering 56 m³/h airflow at 8200 rpm with ball-bearing reliability and 43 dB noise

  • High airflow of 56m³/h for efficient cooling
  • Ball bearing design ensures long operational life
  • 24V DC operation with low 3.6W power draw
  • Electronic protection against reverse polarity and overload
  • Compact 60x60x25mm frame fits tight spaces

Ebmpapst 624HH 60x60mm 24V DC fan

This Ebmpapst 624HH axial fan measures 60 x 60 x 25mm and runs on 24 V DC. It delivers 56 m3/h airflow at 8200 rpm using a ball-bearing motor that draws 3.6 W and 150 mA. The unit weighs 390 g and suits industrial or server chassis that require high-pressure cooling in a compact frame.

Thermals noise and power at 8200 rpm

At full speed the fan produces 43 dB of noise while moving 56 m3/h of air through restricted paths. The 3.6 W power draw and 150 mA current keep 24 V DC distribution loads low. Electronic protection against reverse polarity, blocking and overload via PTC resistors maintains stable operation without thermal throttling.

Bundled connection and control features

The fan terminates in a 2-lead AMG22 TR64 cable with stripped and tinned ends for direct wiring. Speed control up to 100 % is supported through analog or serial interfaces, enabling plug-and-play integration with matched open-loop controllers. The fiberglass-reinforced PBTP housing and PA impeller resist vibration in high-pressure deployments.

Highlights

  • High airflow of 56m³/h for efficient cooling
  • Ball bearing design ensures long operational life
  • 24V DC operation with low 3.6W power draw
  • Electronic protection against reverse polarity and overload
  • Compact 60x60x25mm frame fits tight spaces

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 60x60mm fan and which way should the airflow point?

Use four screws through the 60mm square frame; the intake side faces the motor bracket and rotation is clockwise when viewed from the motor, so orient the fan to pull air in from that side.

What part will wear out first on this ball-bearing fan?

The ball bearings are the primary wear item; the fan weighs 390g and runs at 8200rpm, so bearing noise or increased vibration signals it is time to replace the unit.

At what temperature does the internal protection shut the fan down?

The built-in PTC resistors provide overload and blocking protection that activates when the motor current exceeds the 150mA limit, automatically limiting temperature rise without an external thermal sensor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.