We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame 60 by 60 by 25 mm with seven blades and wire lead

Fans

Fans 614NGM-095 60x60x25mm 24V DC case fan

SKU CH-72MS-TQRG1

Compact 60 mm axial fan delivers 32 m³/h airflow at 24 V DC for tight enclosure cooling

  • 60 mm square frame fits tight 1U spaces
  • 24 V DC supply matches industrial power rails
  • 32 m³/h airflow clears heat from dense enclosures
  • 4 100 rpm speed balances cooling with low noise
  • 66 g lightweight rotor reduces vibration on thin panels

Compact 60 mm 24 V DC axial fan

The 60x60x25 mm frame fits tight chassis where airflow must be directed over struts in a clockwise rotation. Rated for 24 V nominal voltage, it draws 70 mA and consumes 1,7 W while spinning at 4.100 1/min. GreenTech EC technology enables full speed control via analog or serial interface.

Upgrade from smaller or fixed-speed coolers

Replaces lower-flow 60 mm fans that lack electronic commutation or variable-speed capability. The jump is worth it when the system needs 32,0 m³/h maximum free-air flow with intelligent energy-saving operation. Not for builders who need higher static pressure or larger frame sizes for denser heatsinks.

32 m³/h airflow headroom for targeted cooling

Comfortably handles component-level heat exchange in compact devices and heat-exchanger airflow paths. Runs out when chassis impedance exceeds the fan's pressure curve or when total system demand surpasses 35000 m³/h aggregate capacity. Mounting torque limits are 20 Ncm at the wire-outlet corner and 40 Ncm at remaining corners using ISO 4762 M3 screws.

Highlights

  • 60 mm square frame fits tight 1U spaces
  • 24 V DC supply matches industrial power rails
  • 32 m³/h airflow clears heat from dense enclosures
  • 4 100 rpm speed balances cooling with low noise
  • 66 g lightweight rotor reduces vibration on thin panels

Specifications

No published specifications for this item yet.

Questions about this item

What screw size and torque limits apply when mounting the 60x60 mm fan?

Use ISO 4762 M3 screws degreased without washers or braces. Max torque is 20 Ncm at the wire-outlet corner and 40 Ncm at the remaining corners.

How do I connect the 24 V DC fan and which way does it spin?

Supply 24 V DC at 70 mA; the rotor turns clockwise when viewed from the front. Ensure airflow exits over the struts as indicated.

What maintenance does the 66 g axial fan need over its service life?

Periodically remove dust from the blades and struts to maintain the 32 m3/h free-air flow. The sealed motor requires no lubrication; replace the unit if bearing noise appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Case Fans

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.