We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black plastic 60mm frame axial fan 25.4mm deep with seven curved blades and two-wire lead

Fans

Fans 612NGHH 60x60x25.4mm 12V 56.1m³/h 6850rpm case fan

SKU CH-DE4H-GJ6BM

A 60 × 60 × 25.4 mm 12 V DC axial fan delivering 56.1 m³/h at 6850 rpm with a 43 dB noise level and sleeve bearing

  • Compact 60×60×25.4 mm frame fits tight builds
  • 1 m³/h airflow at 6850 rpm clears heat fast
  • 12 V DC, 3.8 W draw keeps power use low
  • 43 dB noise level runs quietly in chassis
  • Sleeve bearing with polarity protection adds reliability

Ebmpapst 612NGHH 60mm DC Fan

This Ebmpapst 612NGHH is a 60 x 60 x 25.4mm DC axial fan built for tight thermal-management spots. It runs on 12 V DC, draws 3.8 W and spins at 6850 rpm to move 56.1 m³/h of air at 43 dB noise level. The 600 series uses a sleeve bearing and brushless drive with integrated polarity-reversal protection.

Check Voltage Clearance Connector

Verify that your system supplies 12 V DC and can deliver at least 317 mA to the fan header. Confirm the 60 mm square mounting pattern and 25.4 mm depth fit your chassis or heatsink cut-out. Ensure the connector pin-out matches the fan’s two-wire lead before ordering.

Sustained Load Behaviour

The brushless motor and integrated electronics maintain constant 6850 rpm speed during continuous operation. Sleeve bearing construction provides cost-effective shaft support for long-running duty cycles. Airflow remains at 56.1 m³/h and acoustic output at 43 dB without the thermal throttling seen in shorter burst tests.

Highlights

  • Compact 60×60×25.4 mm frame fits tight builds
  • 1 m³/h airflow at 6850 rpm clears heat fast
  • 12 V DC, 3.8 W draw keeps power use low
  • 43 dB noise level runs quietly in chassis
  • Sleeve bearing with polarity protection adds reliability

Specifications

No published specifications for this item yet.

Questions about this item

What does the fan come with and is a power cable or adapter needed?

The 60 × 60 × 25.4 mm unit is supplied as a bare 12 V DC fan with integrated polarity-reverse protection; it connects directly to a standard motherboard or controller header so no separate cable or adapter is required.

How do I decide between the 56.1 m³/h airflow at 6850 rpm and a quieter alternative?

This 600-series model delivers 56.1 m³/h at 6850 rpm with a 43 dB noise rating and 3.8 W draw; choose it when maximum airflow in a 60 mm frame is the priority and the sound level is acceptable for the build.

What does the 56.1 m³/h figure mean once the fan is mounted in a case?

In a real chassis the 56.1 m³/h rating represents peak open-air throughput; actual flow will be lower once filters, grilles and component obstructions add static pressure, but the 3.8 W motor and sleeve bearing maintain consistent speed under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.