We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fans

Fans 6038 60x60x38mm 12V .78A PWM thermostat case fan

SKU CH-FN5V-3MT40

12 V PWM fan with thermostat control fits 60 mm square, 38 mm deep server chassis bays

  • 12 V PWM thermostat control adjusts speed to thermal load
  • 60 mm square frame fits standard 6038 mounting holes
  • 38 mm thick profile delivers high static pressure for dense chassis
  • 78 A draw provides strong airflow at 12 V supply

6038 12 V PWM chassis fan

This 60 mm square by 38 mm thick fan runs on 12 V and draws 0.78 A through a four-wire PWM connection. The built-in thermostat adjusts speed automatically based on temperature. It is intended for server chassis and other tight enclosures that require focused airflow in a compact footprint.

Straightforward four-wire PWM install

The fan mounts with standard 60 mm screw holes and plugs directly into a motherboard or fan-controller PWM header. No extra wiring or adapters are needed. The thermostat function only operates when the header supplies a valid PWM signal; a constant-voltage header will run the fan at full speed without temperature control. Builders needing a different voltage or a larger frame will need another model.

Highlights

  • 12 V PWM thermostat control adjusts speed to thermal load
  • 60 mm square frame fits standard 6038 mounting holes
  • 38 mm thick profile delivers high static pressure for dense chassis
  • 78 A draw provides strong airflow at 12 V supply

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the FFC0612DE PWM thermostat is regulating speed correctly after installing the 6038 fan?

Connect the 4-pin PWM header to a 12 V source, then monitor RPM in BIOS or fan-control software; the thermostat should raise or lower speed as chassis temperature changes.

What comes in the box with the 60x60x38 mm case fan and what must I supply myself?

The box contains the 6038 fan unit with pre-attached PWM cable; you must provide 60 mm mounting screws and a motherboard or controller with a 4-pin 12 V PWM header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.