Fans
Fans 6015 24V 1.7W 60x60x15mm 3-wire alarm case fan
A 60 mm square, 15 mm thick case fan running on 24 V and drawing 1.7 W with a three-wire alarm output
- 60 mm square footprint fits tight chassis spaces
- 24 V operation suits industrial and server power rails
- 7 W draw keeps heat output low
- 3-wire alarm signal warns of fan failure
24 V 6015 alarm fan
This 60 mm square case fan runs on 24 V power and draws 1.7 W. It fits the standard 6015 mounting pattern with a 15 mm thickness. A three-wire connection supplies power, ground and an alarm signal for speed monitoring.
Builders with 24 V fan headers
Suits builders whose chassis or controller provides a 24 V fan header and can read the alarm wire. Not for systems that only offer a different voltage header or that cannot use the alarm signal.
Highlights
- 60 mm square footprint fits tight chassis spaces
- 24 V operation suits industrial and server power rails
- 7 W draw keeps heat output low
- 3-wire alarm signal warns of fan failure
Specifications
No published specifications for this item yet.
Questions about this item
What does the 1.7W power draw mean for my 24V system?
The fan consumes 1.7 watts at 24 volts, so it adds minimal load to a 24V rail and fits easily within typical fan-header current limits.
How does the 3-wire alarm connection work in practice?
The third wire carries an alarm signal that toggles when the rotor stalls, letting a monitoring header or controller detect a stopped fan immediately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



