Fans
Fans 4E-230BMotor 12038 AC 230V 120x120x38mm 2650/3000 RPM case fan
AC axial case fan with full-metal construction, moisture-resistant design, and 2650/3000 RPM speeds at 230 V
- AC 230 V operation powers equipment directly from mains supply
- 2650/3000 RPM dual-speed range matches airflow to cooling demand
- 120×120×38 mm footprint fits standard 12038 mounting points
- Full-metal Bi-Sonic construction resists high temperature and moisture
- 21/22 W motor draws 130/140 mA for efficient industrial cooling
Industrial Axial Fan 12038 AC 230V
The Fans 4E-230BMotor is an AC axial case fan built for 230 V mains supply. It uses a full-metal construction rated for high temperature and moisture resistance. The 120 mm square frame is 38 mm deep and runs at 2650 or 3000 RPM depending on line frequency.
Suited for Industrial Equipment Cooling
This fan suits builders who need a 230 V axial mover for rack enclosures, medical gear or rail-vehicle drive cooling. It is not for PC builders who want a low-voltage PWM fan with standard 3-pin or 4-pin motherboard headers.
Mains Voltage 230 V AC Decides Fit
The single specification that decides fit is the 230 V AC supply requirement. If your chassis or controller provides only 12 V DC, this unit will not operate and a different fan must be chosen.
Highlights
- AC 230 V operation powers equipment directly from mains supply
- 2650/3000 RPM dual-speed range matches airflow to cooling demand
- 120×120×38 mm footprint fits standard 12038 mounting points
- Full-metal Bi-Sonic construction resists high temperature and moisture
- 21/22 W motor draws 130/140 mA for efficient industrial cooling
Specifications
No published specifications for this item yet.
Questions about this item
How do I wire the 230 V AC 4E-230BMotor into a 120 mm × 120 mm × 38 mm cutout?
Connect the two mains leads directly to 230 V AC; the 120 mm square frame with 38 mm depth fits the cutout, and the metal housing is secured with four corner screws — ensure the supply is off before wiring.
What maintenance will the 4E-230BMotor need over time?
The sealed ball-bearing motor runs at 2650/3000 r/min with 22/21 W draw; periodically vacuum dust from the blades and verify the 140/130 mA current remains steady — no lubrication is required.
What thermal limit appears first when the 4E-230BMotor runs continuously at 3000 RPM?
The motor is rated for high-temperature, moisture-resistant operation at 230 V AC; sustained 3000 RPM at 22 W will reach its design temperature ceiling before any electrical overload trips.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115342BTC
In stock
