We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black metal axial fan 119mm wide 38mm deep with integrated motor hub and mounting flange

Fans

Fans 4856Z 119x119x38mm 230V AC 13W 100m3/h 1700rpm Ball Bearing

SKU CH-YTZ8-H6KMG

A 119 x 119 x 38 mm AC axial fan delivering 100 m³/h at 1700 rpm with 26 dB noise

  • 230 V AC operation suits mains-powered equipment
  • 100 m³/h airflow delivers steady cooling performance
  • 26 dB noise level keeps acoustic impact low
  • Ball bearing construction extends service life
  • Compact 119 × 119 × 38 mm frame fits standard mounts

119 mm 230 V AC axial fan

This 119 x 119 x 38 mm axial fan operates directly from 230 V AC mains supply. It is suited for industrial enclosures or server chassis where DC voltage is unavailable. The external rotor motor integrates into the impeller hub for a compact footprint. Buyers needing a DC-powered or PWM-controlled case fan cannot use this model.

13 W power draw and 26 dB noise

The fan draws 13 W at 1700 rpm while delivering 100 m³/h airflow. Acoustic output is rated at 26 dB under normal operation. Ball bearings support continuous duty in forced electronic cooling applications. No PWM speed control or tachometer signal is provided for motherboard monitoring.

4856Z series with ball bearing

The 4000Z series unit uses a ball bearing for durable high-speed rotation. Mounting flanges with holes allow direct installation inside the target unit. Airflow capacity reaches 100 m³/h at the stated speed. This single specification defines suitability for the intended cooling task.

Highlights

  • 230 V AC operation suits mains-powered equipment
  • 100 m³/h airflow delivers steady cooling performance
  • 26 dB noise level keeps acoustic impact low
  • Ball bearing construction extends service life
  • Compact 119 × 119 × 38 mm frame fits standard mounts

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 119 x 119 mm frame and where should the airflow point?

The square frame has flanged mounting holes on each corner; secure it with four screws and orient the fan so the label side faces the intended exhaust direction, because air moves axially from the label side toward the grille side at 100 m³/h.

What part will wear out first on the 4856Z running at 1700 rpm?

The ball bearing supports the rotor shaft; after extended continuous duty the bearing lubricant degrades, leading to increased noise above the rated 26 dB and eventual rotor play, so the bearing is the component that determines service life.

At what point does the 230 V AC motor hit its thermal limit during non-stop operation?

The motor draws 13 W continuously; if the surrounding enclosure prevents the 100 m³/h flow from removing that heat, the winding temperature rises until the internal thermal protector trips, making restricted airflow the first sustained-use limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.