We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black metal axial fan, 119mm sides, 38mm deep, wire leads visible

Fans

Fans 4656N AC 230V 19W 119x119x38mm 160m3/h 47dB case fan

SKU CH-AWZZ-J0BNH

AC-powered 119 mm square axial fan moves 160 m³/h at 47 dB with ball-bearing motor running at 2650 rpm

  • AC 230 V operation plugs directly into mains power
  • 19 W draw keeps running costs low
  • 160 m³/h airflow moves heat efficiently
  • 47 dB noise level suits quiet environments
  • 2 650 rpm ball-bearing motor built for long life

Compact 230 V AC axial fan for industrial cooling

This 119 mm square fan runs directly from 230 V mains supply and fits a 38 mm deep mounting frame. It is built for equipment that needs continuous forced-air cooling without a separate DC power supply. The ball-bearing motor is rated for long service life in stationary cabinets and enclosures. Buyers who need a low-voltage PWM fan for a PC motherboard header cannot use this unit.

160 m³/h airflow at 2650 rpm decides the cooling

The fan moves 160 cubic metres of air per hour at its fixed speed of 2650 revolutions per minute. That single figure determines whether the thermal load of your chassis or heat exchanger can be matched. No speed control or tachometer signal is provided, so the airflow cannot be adjusted to quieter or higher-performance curves.

19 W draw and 47 dB noise stay steady under

Power consumption holds at 19 watts with a current of 83 mA while the acoustic output remains at 47 decibels during continuous operation. The ball-bearing design maintains these levels without the wear-related rise in noise or power that sleeve bearings can exhibit over time. The motor is intended for uninterrupted duty rather than short bursts.

Highlights

  • AC 230 V operation plugs directly into mains power
  • 19 W draw keeps running costs low
  • 160 m³/h airflow moves heat efficiently
  • 47 dB noise level suits quiet environments
  • 2 650 rpm ball-bearing motor built for long life

Specifications

No published specifications for this item yet.

Questions about this item

What does the 160 m³/h airflow deliver in a real enclosure?

The fan moves 160 cubic metres of air per hour at 2650 rpm, providing forced electronic cooling for heat exchangers or compact enclosures where space-saving axial flow is required.

How does the 230 V AC supply affect installation and speed control?

The unit runs directly on 230 V AC at 83 mA maximum current; speed can be adjusted up to 100 % via analogue or serial interface for open-loop control.

What mounting clearance does the 119 x 119 x 38 mm frame need?

The square frame measures 119 mm per side with a 38 mm installation depth, and the sturdy steel plate construction fits the cut-out dimensions specified for the 4000N series.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.