We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal axial fan, 119mm square frame, 38mm deep, terminal connectors

Fans

Fans 4650N-465 12038 230V 18W 119mm 38mm 2680rpm 160m³/h case fan

SKU CH-GE3Z-AQSK8

AC axial case fan, 119 × 38 mm, 230 V, 18 W, 2680 rpm, 160 m³/h airflow, 50 dBA, sleeve bearing, terminal connection

  • AC 230 V supply simplifies wiring into mains-powered enclosures
  • 18 W draw keeps energy use low for continuous operation
  • 119 mm × 38 mm frame fits standard 12038 mounting holes
  • 160 m³/h airflow at 2680 rpm delivers strong cooling capacity
  • Sleeve bearing and 50 dBA rating balance durability with quiet running

Compact AC axial fan for industrial airflow

The Fans 4650N-465 is a 119 mm by 38 mm axial fan that runs directly from a 230 V AC supply. It delivers 160 m³/h of airflow at 2680 rpm while drawing 18 W. The sleeve bearing and terminal connection suit equipment builders who need a simple, mains-powered cooling module for enclosures, heat exchangers or electrical cabinets.

Steady airflow at 50 dBA under continuous duty

At full speed the fan maintains a constant 179.3 m³/h (105.53 cu ft/min) with a noise rating of 50 dBA. The metal frame and external-rotor motor are built for uninterrupted operation in forced-air cooling loops. GreenTech EC technology allows 100 % speed control via analogue or serial interface, so airflow can be matched to thermal load without cyclic start-stop stress.

Replaces larger belt-drive or shaded-pole blowers

This 4600 series unit fits where bulky belt-driven fans or inefficient shaded-pole motors once sat, cutting installation depth to 38 mm. The jump is worth it when a designer needs mains voltage, terminal wiring and speed control in a single compact housing. It is not for builders who require ball-bearing longevity, DC voltage input or airflow above 35 000 m³/h.

Highlights

  • AC 230 V supply simplifies wiring into mains-powered enclosures
  • 18 W draw keeps energy use low for continuous operation
  • 119 mm × 38 mm frame fits standard 12038 mounting holes
  • 160 m³/h airflow at 2680 rpm delivers strong cooling capacity
  • Sleeve bearing and 50 dBA rating balance durability with quiet running

Specifications

No published specifications for this item yet.

Questions about this item

How loud is the 50 dBA noise rating when the fan runs continuously at 2680 rpm?

At 50 dBA the fan produces a noticeable but moderate hum; in a typical case it blends into background noise and is unlikely to disturb a quiet office.

What mains wiring does the 230 V AC terminal connection require?

The fan connects directly to 230 V AC via screw terminals; no separate power supply or adapter is needed, but a qualified electrician should make the connection.

Will the 119 mm × 38 mm frame and 160 m³/h airflow fit a standard 120 mm mounting pattern?

Yes, the 119 mm square frame matches the common 120 mm hole spacing, and the 38 mm depth clears most chassis side panels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.