Fans
Fans 4314Motor 24V 210mA 5.0W 120x120x32mm case fan
Original 24 V ebmpapst axial fan moves 170 m³/h at 2800 rpm with 5.0 W power draw
- 24 V operation suits industrial control panels
- 0 W draw keeps power budgets low
- 170 m³/h airflow cools dense enclosures
- 2800 rpm speed delivers strong static pressure
- 120 × 120 × 32 mm frame fits standard mounts
24 V axial fan for tight spaces
The Fans 4314Motor is a 120 mm by 32 mm axial case fan that runs on 24 V and draws 210 mA at 5.0 W. It spins at 2800 r/min and moves 170 m³ of air per hour. The unit is new and built by ebmpapst for equipment that needs focused airflow in a shallow profile.
Fits 120 mm mounts with 32 mm depth clearance
This fan slots into any standard 120 mm square opening provided the chassis or device allows at least 32 mm of installation depth. Its 24 V input means it needs a matching voltage rail or converter; it does not run from common 12 V headers. The thin frame frees vertical space behind drive cages or inside slim industrial enclosures where thicker fans cannot sit.
Suits builders who need a 24 V thin axial mover
Buyers replacing a 4314Motor in medical, telecom or industrial gear will find a direct match. Anyone whose system only offers 12 V fan headers, who requires PWM speed control, or who needs higher static pressure for dense radiators should look at other models.
Highlights
- 24 V operation suits industrial control panels
- 0 W draw keeps power budgets low
- 170 m³/h airflow cools dense enclosures
- 2800 rpm speed delivers strong static pressure
- 120 × 120 × 32 mm frame fits standard mounts
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum operating speed of the 4314Motor fan under sustained load?
The fan runs at 2800 rpm with a 5.0 W motor drawing 210 mA at 24 V.
How loud and how hot does the 120 mm ebmpapst axial fan get during continuous 24 V operation?
The supplier describes low noise level and exceptional efficiency; power draw stays at 5.0 W so heat output remains modest.
Which connector or mounting hardware must I already have to install this 120x120x32 mm case fan?
The 120 mm square frame with 32 mm depth fits standard 120 mm mounting holes; a 24 V power source with a compatible lead is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
