We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 60mm case fan black frame four wires

Fans

Fans 2410RL-04W-B20 case fan 60x60x25mm 12V 0.12A 4000RPM 54.7CFM 48Pa 41dBA

SKU CH-D9A0-W9M42 MPN 2410RL-04W-B20

Compact 60 mm axial fan delivers 54.7 CFM at 4000 RPM with 41 dBA noise

  • High airflow with 54.7 CFM at 4000 RPM
  • Strong static pressure of 48 Pa for restrictive spaces
  • Low noise output at 41 dBA during operation
  • Wide temperature range from -20 to 75 °C
  • Long service life rated at 50000 hours

NMB 60 mm 12 V axial fan

The NMB-MAT 2410RL-04W-B20 is a 60x60x25 mm axial fan built for 12 V systems. It draws 0.12 A and spins at 4000 RPM to deliver 54.7 CFM of airflow. Rated noise is 41 dBA and the design targets a 50,000 hour service life at ambient temperatures from -20 to 75 °C.

Industrial and embedded cooling

This fan suits equipment that needs steady airflow in tight spaces, such as medical devices, rail vehicle drives, new-energy vehicle systems and industrial cleaning machines. It is not intended for builds that require PWM speed control or larger frame sizes for higher static pressure.

48 Pa static pressure

The 48 Pa pressure rating determines whether the fan can push air through dense heatsinks or restrictive ducts. Buyers should match this figure to their system impedance before ordering.

Highlights

  • High airflow with 54.7 CFM at 4000 RPM
  • Strong static pressure of 48 Pa for restrictive spaces
  • Low noise output at 41 dBA during operation
  • Wide temperature range from -20 to 75 °C
  • Long service life rated at 50000 hours

Specifications

No published specifications for this item yet.

Questions about this item

Will the 60 mm frame and 12 V connector fit my older chassis fan header?

The fan measures 60x60x25 mm and draws 0.12 A at 12 V, matching standard 3-pin or 4-pin headers on legacy boards.

How do I confirm the 2410RL-04W-B20 is spinning at 4000 RPM after install?

Monitor the fan header in BIOS or software; a reading near 4000 RPM with 54.7 CFM airflow shows it is operating to spec.

Does the box include mounting screws or only the 95 g fan unit?

Only the fan is supplied; four 60 mm mounting screws must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.