Fans
Fans 1238-12HBTA-1 DC 12V .90A 3-wire 120x120x38mm case fan
A 12 V DC server fan measuring 120 by 120 by 38 mm with a 3-wire connection and 0.90 A draw
- 12 V DC power for direct PSU connection
- 90 A draw keeps current load low
- 120 mm square frame fits standard mounts
- 38 mm depth suits server chassis
120 mm square DC fan for server chassis
This 12 V DC case fan measures 120 by 120 mm with a 38 mm thickness and draws 0.90 A through a three-wire connection. It is built for server enclosures and industrial equipment that require high airflow in a standard square frame. Buyers maintaining rackmount hardware or replacing noisy original units will find a direct mechanical match.
Verify voltage, current and mounting before ordering
Confirm that your system supplies 12 V DC and can deliver at least 0.90 A on the fan header. Check that the chassis has 120 mm square mounting holes with 38 mm depth clearance for the thicker frame. Ensure the three-wire connector matches the motherboard or fan controller pinout, as PWM control is not indicated.
Highlights
- 12 V DC power for direct PSU connection
- 90 A draw keeps current load low
- 120 mm square frame fits standard mounts
- 38 mm depth suits server chassis
Specifications
No published specifications for this item yet.
Questions about this item
Does the 1238-12HBTA-1 include mounting screws or a power cable, or must they be purchased separately?
The fan unit is supplied alone; mounting hardware and any required 3-pin power cable are not included and must be sourced separately.
Is the 1238-12HBTA-1 the only 12 V, 0.90 A, 120×120×38 mm version available, or are there alternative speeds or connector types?
Only the 1238-12HBTA-1 with a 3-wire 12 V 0.90 A specification is offered; no other speed grades or connector variants are listed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



